Electronics Forum | Mon May 25 21:27:07 EDT 2009 | paligora
Our machine is YAMAHA YVL88II and the issues we have with these data switches are either not being picked up from the feeder at all or are being ped before assembly.
Electronics Forum | Wed Jan 17 11:04:57 EST 2001 | gerits
Dear Kyung Sam Park, If you use Philips E.M.T. or Yamaha equipment you can get this software via them. In case you use other equipment you can go and visit the site of Cimcis company who make software for what you are asking. (www.cimcis.com) Regar
Electronics Forum | Mon Mar 07 22:40:36 EST 2011 | sarason
I have written an SMT file generator available at http://users.tpg.com.au/sarason/index.html try the YM6021 generator output option, it is very similar to a CSM66 file. The YMxx series file is a little different in format. This should help your file
Electronics Forum | Thu Aug 04 21:20:50 EDT 2011 | jeffr
Is that Philips CSM60 ? (Old Yamaha machine)
Electronics Forum | Fri Aug 05 02:54:24 EDT 2011 | r2d2
Yes Philips = Yamaha , the problem is already solved.
Electronics Forum | Fri May 28 01:47:05 EDT 2010 | jeffr
I have the part you need. The Yamaha Part number is K39-M7173-000. The same part is used on Philips machines using a different part number. This assembly is expensive because the motor is attached to a Harmonic Gearbox and encoder. I have a new unit
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64
Electronics Forum | Sat May 03 10:20:47 EDT 2014 | proy
https://groups.yahoo.com/neo/groups/Assembleon-smt/info See above, I have created a yahoogroup for Assembleon, philips, Yamaha users (a while ago I created a yahoogroup for zevatech and have since moved on, but it is still alive with some 75 active
Electronics Forum | Mon May 05 21:31:07 EDT 2014 | davef
Peter is a long-time participant in the Forum. Seven or eight years ago, he started the YahooGroup for Zevatech / Juki users and grew it to 70 - 80 users. When his company moved to Assembleon machines, he turned the management of the Zevatech Group t
Electronics Forum | Wed Feb 06 00:43:37 EST 2008 | jmelson
Well, as usual, you can't trust ANY documentation to get it right! I have a CSM84, model PA1306/20, the last model with DC brush motors. I have the service manual for the machine, it has schematics of much of the machine, but skips the servo amps a
