Electronics Forum | Wed Mar 08 16:52:07 EST 2006 | darby
Which model Yamhah are you talking about and what is the make and model # of the manifold block for the micro ejectors? If it has the Koganei ME05M series then your local rep can supply the filters. It is a good idea to get spare O-rings for the filt
Electronics Forum | Sun Mar 12 11:10:51 EDT 2023 | compit
I don't know how in Panasonic - in Yamaha and similar pressure / vacuum is calibrated for each head and nozzle - maybe you need to calibrate?
Electronics Forum | Wed Mar 08 03:44:46 EST 2006 | lov3ly_9irl
Hi, Can anybody know a company that sell vacuum filter for Juki and Yamaha machines? Tks. Lauren
Electronics Forum | Wed Mar 08 07:51:27 EST 2006 | sagan
Any SMC resseler may have the Venturi filter for the Juki... as for the Yamaha, i don't honestly know.
Electronics Forum | Fri Mar 10 03:30:44 EST 2006 | lov3ly_9irl
Thanks
Electronics Forum | Mon Dec 18 14:11:02 EST 2023 | erikfriesen
Has anyone ever replaced the venturi vaccum pump on the CP45 or other series machine? Or used a centralized vaccum system? It works fine, but air consumption seems excessive. This is what is in there, it probably uses 10cfm at least. https://www.p
Electronics Forum | Fri Jul 31 17:09:55 EDT 2009 | isd_jwendell
Don't know about Topaz, but on Essemtec machine using SMC ejector, there are separate solenoid valves for vacuum and release. The connectors are identical and side by side. If these connectors were swapped then I would have the symptoms you describe.
Electronics Forum | Tue Jul 19 14:20:47 EDT 2016 | pavel_murtishev
Hyng, Could you please specify exact model number for Siemens? Panasonic is famous for quite high field proven stability. Vacuum pumps for placement heads instead of ejectors is standard option for Panasonic, for instance. I would choose them. An
Electronics Forum | Tue May 18 09:58:17 EDT 2021 | kumarb
Thank you so much for the advice. We were suspecting blockage but know that we have clean nozzles. Did the air blow out and removed a spot of black matter - perhaps what was an old o-ring? Nozzles are 61 and 62 posing the issue. Our tech said that 64
Electronics Forum | Sun Mar 24 16:53:44 EST 2002 | mikestringer
We place a similar square pin style of connector on one of our products. The connector is a 22mm high HW series from Samtek. We have a Yamaha YVL88 MK1 and YV88XS set up to handle them (Yes they are rebadged as Philips machines in some markets). No