Electronics Forum | Wed Feb 10 17:00:44 EST 1999 | James Seagle
Does anyone have experience placing a Pinrex 2mm 2x20 SMT header. The dimensions of the part are as follows: length 40mm (1.58"), width 6mm (.236"), height 5.35mm (.211"), pitch 2mm (.079"). If so, what type of centering are you using? Any advice
Electronics Forum | Wed Sep 17 05:41:16 EDT 2008 | ralphspm
Can Fuji machines such as IP1 and IP2 utilise 2mm pitch feeders provided by Hover-Davis? Has anyone used them on an IP1 or IP2, and if so were they effecient? Does anyone have 2mm pitch feeders that utilise an Fuji IP1/IP2, for sale? We are currently
Electronics Forum | Fri Feb 12 08:56:57 EST 1999 | Stefan Witte
You'll have to have a special nozzle made in order to pick the header from the feeder. The nozzle should pick the part throught the pins on the plastic body. I had once a nozzle made for the same application and placed the parts without any further a
Electronics Forum | Wed May 25 09:46:02 EDT 2016 | stevedc
According to their feeder brochure the 2mm feeders are listed at $650. Still not very cheap, but not un-obtanable. http://www.goppm.com/8x2mm-feeder.php Or is the pro version a different feeder? BR, Steve
Electronics Forum | Tue Jan 14 11:02:59 EST 2003 | soupatech
I found a feeder with a 2mm pitch and was told that although it was made for the CP4, it would work with the CP3. Before we throw out a thousand bucks, has anyone had experience loading parts off of a 2mm pitch tape with the CP3? The part is a 1.6
Electronics Forum | Tue May 17 11:12:09 EDT 2016 | bobpan
Press both buttons simultaneously. Press black button 3 times. Led will flash then go solid. This will toggle the pitch between 2mm and 4mm. have fun.
Electronics Forum | Mon May 16 19:57:51 EDT 2016 | rx8pilot
I recently purchased some used ThinPRO precision feeders for my Quad IV-C (PPM 4000C). They are in great shape, but I do not know how to program them to index at 2mm Does anyone have experience with these that know how to program them? I can only go
Electronics Forum | Tue May 17 18:00:47 EDT 2016 | rx8pilot
I spoke with a very pleasant gentleman at Automation Technical Services. We were able to determine that my feeders are not the modified versions that are capable of 2mm pitch. They are only capable of 4mm. They offer a feeder that is the same basic h
Electronics Forum | Tue Jan 14 15:38:28 EST 2003 | fujispares
Hi, CP3 will have trouble placing 0603 parts - I wouldn`t use a CP3 for these parts - A CP4 will be more suitable. A older CP4 feeder will fit and function on a CP3.
Electronics Forum | Mon Oct 05 21:05:32 EDT 1998 | Stefan Witte
Most of the older placement machines might not have a 2mm advancing feeder. Here is how I get by picking from a 8 mm feeder without loosing every second component. 1. Define a second component in the BOM. 2. Define this component in the feeder set up
