Electronics Forum | Sat Jun 05 08:18:03 EDT 2004 | vinitverma
Hi Grant, If you're really looking for speed, I'm sure you're looking for another machine for doing the QFPs, BGAs stuff etc. In that even, why not have a look at the long proven Assembleon FCM machine!! It is a totally different concept with UNMATC
Electronics Forum | Tue Mar 28 07:28:25 EST 2006 | Rob C
I would have to disagree on this. My experience is that you should never justify capital expediture based on just the obvious up front costs alone. There is no mention of risk of recall, warranty costs, scrap costs,and so on. Which you may get from a
Electronics Forum | Wed Sep 21 12:30:03 EDT 2005 | Rob
Hi Greg, We've used lots of machines over the years & seen lots of different tape related issues - the main one being snap off of the cover tape, usually due to too much glue, over entusiastic heat seal, or a feeder requiring maintainance. Also the
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long
Electronics Forum | Sun Dec 03 23:50:58 EST 2006 | saiwong
It depends where. In Asia, Panasonis is no. 1, Fuji the second.
Electronics Forum | Mon Nov 29 13:01:35 EST 2004 | bobsavenger
I have a DEK 265LT screen printer and a Fuji bare board loader. I cannot get the two machines to talk through the SMEMA cable. I have the personality card for the DEK and I have the correct cable for a FUJI machine. Is there something that I nee
Electronics Forum | Wed Apr 14 22:23:09 EDT 1999 | wil allen
We are currently looking into purchasing either a Fuji NP or Universal Flex jet machine. Does anybody have any feedback from running these machines in a production environment? I now that a limited number of each machine has been released so far.
Electronics Forum | Mon Dec 06 00:44:45 EST 2004 | donb
You probably have already done this... but you need to enter the maintenance program with the maintenance key, select "Set Prefs" scroll down to "Upline Machine" and enter "Fuji".
Electronics Forum | Tue Dec 07 00:53:48 EST 2004 | donb
I think I have schematics for a Fuji loader here. Let me know if you want me to scan & email or fax some pages.
Electronics Forum | Sun Dec 03 23:36:36 EST 2006 | lut
Hi Can any boady give the market share of panasonic, Fuji and assembleon pick and place machine. thank you
.gif)
