Electronics Forum | Fri Nov 17 15:20:37 EST 2000 | Kris
Dave, That's exactly what we are seeing. There is a trail of components leading away from the pick point, all of which are 0402 parts. I can remove the feeder from the machine, advance a few parts into view, turn over the feeder and only half will
Electronics Forum | Tue Mar 29 16:36:32 EDT 2011 | vickt
If you are still experiencing problems... contact GSMTECHS@UIC.COM for further help. thx
Electronics Forum | Thu Mar 03 19:10:44 EST 2011 | fordf1502004
We are using Universal's Hsc for our production. the problem we are having is we are placing 0402 with a 8mm feeder with a pitch of 2, while running production, the feeder continues to advance with a pitch of 4. anyone have an idea as to why. the com
Electronics Forum | Fri May 06 08:27:38 EDT 2016 | kahrpr
We have Samsung and havehad no problems with simultaneous pick ups with 201s 0r 402s. the feeders are durable and do not need much repair especially the sm feeders. The SME feeders have not been out as long so we will see so far so good. As with all
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Tue Mar 13 12:33:35 EST 2001 | Simply Anonymous
Try calling Quad, I know that they were in development of a feeder designed specifically for 0402. The problem has always been the pick of such a small part, but the placement is very reliable. By way, have you heard that Quad is being purchased by
Electronics Forum | Tue Mar 13 12:15:14 EST 2001 | onset
We have a 4C and it places 0402 components without any problems. The tricky part is getting the machine to pick them up out of the feeder it takes patience but you will get it. jake p.s. you
Electronics Forum | Fri Apr 23 22:42:13 EDT 2004 | ethercom
Thanks for the input Pete. I am using CP4 8x2 feeders. I have tried first with 0.7mm nozzle. Although pick up was OK, the camera saw a pregnant 0402 part which is as you know is 1mm by 0.5mm. I then moved to specially made 0.6mm nozzle to minimise th
Electronics Forum | Wed Apr 28 17:41:44 EDT 2004 | longpham246
Hello! We placed quite a few of 0402 with our CP3 using 0.7mm nozzle with the same feeder as you had. Pick up can be adjust and calibrated, but that is not the problem, I agreed with you on that part. The trick is you have adjust and play around wi
Electronics Forum | Mon Jan 07 09:28:49 EST 2008 | pjc
Picking the 0402 is very important- correct picking will facilitate correct placing. The quality of the feeder is key. I am not familiar with the QSA, but feeder quality is important for all picking 0402 and 0201 components.
