Electronics Forum | Wed Jul 16 14:21:15 EDT 2014 | toddp2012
Hi all, we have a Speedline Technologies ELEOCTROVERT/Aquastorm 200. In January we stared supplying it with pre-filterd to the DI cabinet next to machine so our large media would last longer. All was fine for about 4 months and then we started gett
Electronics Forum | Wed Mar 21 10:37:02 EDT 2012 | torch
we are currently developing a 180 degs downhole tool and are right at the limits of our current solder paste, the tool has mostly surface mount parts and some fine pitch ic's. i was wondering if anyone had any recomendations for a suitable solder pas
Electronics Forum | Wed Mar 21 13:47:16 EDT 2012 | jax
To have an Operating Temp (Tool Classification) within your range, you might want to try. PB85 (Pb85/Sb10/Sn5) SMT is normally processed using Vapor Phase but can also be achieved with Nitrogen assisted Convection Reflow depending on size and compl
Electronics Forum | Fri Jul 18 12:16:06 EDT 2014 | island2013
I had the same situation at a facility a few years ago. We moved our wash from one building to another and it was fine for months and then we had the foaming issue similar to yours. We tried everything from adding anti foam agents to even having th
Electronics Forum | Wed Mar 21 11:42:54 EDT 2012 | davef
Downhole solder suggestions, in order of preference are: * Kester Sn96.3Ag3.7. Most vendors do not stock straight tin-silver alloys, whose wallet is that fat? * SAC305 can usually be used in place of one of the copper-free tin-silver alloys in downho
Electronics Forum | Fri Jul 18 15:25:19 EDT 2014 | davef
The presence of agitation at an air / solution interface and a foaming agent causes foaming. Most water soluble fluxes contain surficants. Surficants are foaming agents. First, it's likely this foaming is caused by poor control of the temperature of
Electronics Forum | Tue Nov 04 12:10:56 EST 2014 | richearle
Hi, I've got a Microline 200TF - I guess it's a 1980's machine. It's gone pop and I cant fix it without a circuit diagram (there's several pcbs in it with a variety of relays, triacs and what-not). If anybody has a circuit or any othe rinfo on it I
Electronics Forum | Fri Nov 07 16:28:05 EST 2014 | nathanhawks12
For best 2-32 layers PCB Prototypes prices visit http://www.rushpcb.com or http://www.rushpcb.co.uk
Electronics Forum | Sun Nov 09 15:03:20 EST 2014 | warwolf
Google doesn't return anything with this one. Your best bet would be to take them out and look for obvious damage, check that the relays are working/fuses are okay and what not. If its anything like the PLC that has died then you'll be out of luck.
Electronics Forum | Fri Jul 27 17:17:05 EDT 2018 | leandroxp
how to solve the error DIO in the machine SI-G200 MODEL SONY.