Electronics Forum | Wed Jun 04 22:52:32 EDT 2003 | hwatali
Now we are in urgent to buy 1.FUJI CP6-4000 or CP6-5000 for 3 sets;2.FUJI CP643E for 2 sets;3.CP6 8��2 and CP6 8��4 paper feeder. If you can supply these to me,pls contact me asap.
Electronics Forum | Sat Jun 01 10:35:16 EDT 2013 | aemery
No! Equipment OEM's have to license each CPU box or OS they sell. Your system machine software 8.4.3? is built to run on an NT OS. Microsoft no longer supported NT when the UP2000's/AP printers were converted to NT from DOS around 1999-2000. Speedl
Electronics Forum | Tue May 01 13:52:51 EDT 2007 | jasont
plz advise if the below feeders are compatible on CSM 46/60 (are they downwards compatible?); 1. Philips series FV-84-xxxxxC, model PA2903/70 (2,4 pitch, 8mm) QTY=29 2. Philips series FV-82-7-xxxxD, model PA2903/73 0603-type (2,4 pitch, 8mm
Electronics Forum | Tue Sep 19 11:28:09 EDT 2000 | Wolfgang Busko
Mikeal�s approach is one of the more cautious ones. IPC/JEDEC J-STD-033 clause 8.6 talks about 200�C body-temperature not to be exceeded and how it�s best measured. If you go for that method and you made sure that in your wavesoldering (that�s what
Electronics Forum | Fri Nov 02 08:30:40 EST 2001 | fmonette
For double-side reflow boards, take note that if you have moisture-sensitive components on the first side, you will need to track their remaining floor life up to the final reflow. This is because the reflow process is too fast to effectively remove
Electronics Forum | Mon May 13 10:37:56 EDT 2002 | fmonette
The other important issue relates to moisture sensitive devices (MSD). If you have MSDs on the first side, you need to track the remaining floor life of the components on the partially assembled boards between the first and second reflow. Contrary to
Electronics Forum | Thu Sep 25 12:59:14 EDT 2003 | successmani
hi, I am a research student in Electronics manufacturing at RIT. We are planning to assemble boards using lead free solder paste. I was wondering would there be any changes in printing in using lead-free paste"Sn-3.9Ag-0.5Cu". Thedensity of Sn-37Pb
Electronics Forum | Wed Feb 16 09:37:58 EST 2005 | beta
Hi Guys, I have a customer who requires 95 paper 8*4 CP6 feeders on the setup. We dont have the required quantity but we do have embossed feeders that we could use. Just looking for some onfo. on performance using paper in embossed feeders as I migh
Electronics Forum | Tue Jan 02 14:50:37 EST 2001 | fmonette
Dear Vicki, If you decide to use high temp paste, I suggest that you verify the rating of the components, especially for moisture-sensitive devices which are normally qualified at peak reflow temperatures of 220-235C. The specified floor life will
Electronics Forum | Tue Dec 04 13:23:05 EST 2001 | fmonette
Hi Steve, It sounds like your product will have many moisture-sensitive devices on both sides. You should be aware of the additional controls that are required to insure the reliability of these components in a double-side reflow application. The
