Electronics Forum | Tue Mar 08 10:12:07 EST 2011 | cyber_wolf
Not sure what you mean. I have never heard of the stencil frame guides being out of square.
Electronics Forum | Thu Nov 11 17:49:11 EST 2004 | pdeuel
We are having a problem with our AP-24x printer. When the vacuum motor spins up we get a 60 hz buzz into the DC drivers for the forcers and the stencle wiper. We also indicate a main power drop from 115 vac to 80 vac. The vacuum motor checks out good
Electronics Forum | Mon Aug 23 15:27:50 EDT 2004 | shagnasty
Help I have an MPM AP24X after I reset the machine I get a error ( Cognex is not responding ) I have checked everything and I'm coming up empty My software is Cognex 2000 dated at 11/24/95 and I believe the version is SAP 4.11 - 06 please help if y
Electronics Forum | Thu Nov 11 22:01:11 EST 2004 | Ken
Relay: Yes, you can drive a "DC" relay with AC. As long as the latching threshold is achieved, you can close the contacts. However, if the relay impedence is improperly selected, relay chatter can occur. I am confident MPM selected a correct rela
Electronics Forum | Thu Nov 11 23:09:35 EST 2004 | valuems
Hello There is several items that could cause this problem. And ken don't ever try to upgrade any software unless you are real sure that you have every thing on the hard drive backed-up. MPM just loves to sell the 2D codes over and over. There i
Electronics Forum | Mon Apr 10 09:48:43 EDT 2000 | Dave C.
John, having worked at a major U.S. telecommunications co. I can tell you we were placing through hole connectors in SMT. Using MPM printers 3000 2000 AP36 AP24. We opened the apertures on the stencil 25% over lead diameter to allow more paste(it wou
Electronics Forum | Mon Sep 20 11:53:41 EDT 1999 | Scott S. Snider
| HI everyone, | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 and .001
Electronics Forum | Thu Sep 23 21:51:27 EDT 1999 | harry
| | HI everyone, | | | | We are using a Siemens ap-25 screen printer, in the past we have not had any problems with adhesive placement until a couple of weeks ago. It seems the x axis has decided that it should be set somewhere between .00085 an
Electronics Forum | Sat May 08 01:18:13 EDT 2004 | valuems
Hello Sam Yes we have the software, but there are several things that we need to check on. First, what caused the software that you have to get damaged? If we put more software in the drive will that also get damaged? We need to know what software
Electronics Forum | Thu Nov 11 18:36:29 EST 2004 | valuems
Hello We have been working on the MPM's for over 11 years now. And we have never had any trouble with that circuit, just goes to show you. If you have one of the old, old manuals you will find a lot of errors. They corrected them as they went. We
