Electronics Forum | Tue Apr 29 12:31:15 EDT 2008 | johnmanley
We manufacture several water based ink removers. We have 1 type for solvent based inks and another for non solvent based inks. Check out our info and contacts atwaterworksllc.com
Electronics Forum | Fri Aug 08 14:39:26 EDT 2008 | dmiller
I would have to second the opinion on the water based flux. If you don't want to deal with the solder balls, switch to an alcohol based flux. Unless you have a board that takes a while (water based tends to stay active longer), alcohol is easier to
Electronics Forum | Sat Sep 18 03:50:23 EDT 2010 | vinitverma
I know of Ambitec (Taiwan). They make feeder calibration jigs where the base is common for all types of feeders. You just need to replace the jig on the base depending on the feeders you're trying to calibrate. They provide base as well as jigs for m
Electronics Forum | Wed Aug 21 13:28:20 EDT 2019 | ameenullakhan
And what is the solder paste selection recommendation for the same. 1. Water soluble ( organic based flux solder based ) 2. No clean ( rosin or resin based solder paste ) customer is suggesting water soluble chemistry , which is having lot hot an
Electronics Forum | Thu Apr 20 03:46:26 EDT 2006 | aj
Hi Jon, Thanks for that. I seem to be having a problem getting a unit on Trial. I have plenty of access and my main priority is to reduce the amount of dross (or may I say Solder) that we send back as Dross, I am based in Ireland so I have to go t
Electronics Forum | Tue Jan 15 13:16:25 EST 2008 | ck_the_flip
Yes, the previous "non-balling" flux was alcohol based, but very weak activity. We found it was worth the switch to water-based, to get prettier solder joints - but...at the expense of having to "brush off" solder balls on a couple of assemblies wit
Electronics Forum | Wed Apr 28 12:08:02 EDT 2010 | tjg
Our latest designs are flip chip on flex based and we have issues with delamination/blistering. We know it is related to our vapor solvent (n-Propyl Bromide based) attacking an inner layer adhesive. Has anyone else ever heard of something like this?
Electronics Forum | Wed Oct 19 04:52:40 EDT 2011 | ranco13
Hi, we have ERSA flow selective machine. We are using 420s-lf No-Clean flux (lead free process). It is water based. Before that we used for about 2 years in JS-EU-31 (KOKI) (alcohol based). It did excellent job (we moved to water based flux just bec
Electronics Forum | Tue Apr 02 13:08:40 EDT 2013 | babe7362000
It has been years since I used autoprogram. But I believe your low reference number is your low slot number on the base and then the ref. is what slot you will teach your feeder ref. to the far left. And the High slot number is the higest slot numb
Electronics Forum | Fri May 17 14:12:17 EDT 2002 | dason_c
Not now, Valor may under develop the module for its Trilogy 5000 with the stencil aperture based on the rules which you set. Also, check with IRI stencil (Alpha), they have a s/w and based on using ODB++ file and not Gerber. Rgds.
