Electronics Forum | Thu Sep 12 09:15:29 EDT 2002 | mhoughton
I have printed and placed similar devices in high volume with exactly this spec for a couple of years with no problems, are you using laser cut stencils and what type of solder paste are you using? and what is the end use of the product as it may nee
Electronics Forum | Thu Sep 12 10:45:29 EDT 2002 | pbarton
We have used a laser cut stencil 0.15mm (0.006") thick with 0.3mm (0.012") square apertures radiused in the corners 0.06mm (0.0025") to aid paste release. This approach with the (type 3) paste we use has proven successful on thousands of devices plac
Electronics Forum | Tue Feb 19 09:24:25 EST 2019 | cyber_wolf
Reflow profiles are based on the product and materials you are soldering. You need profiling software and a data logger.
Electronics Forum | Thu Aug 24 08:59:38 EDT 2000 | Eugene Smelik
Dr. Lee, For Pb-free solders, will the reflow profile be similar to that of Sn/Pb, with an flux activation plateau before going to peak reflow, or will the profile be more linear in nature? Are there advantages/disadvantages to either profile for P
Electronics Forum | Tue Feb 19 08:41:02 EST 2019 | prasanth
dear experts, i want your suggestion for getting a profile in Heller 1707 mk iii series re-flow machine ,its 7 zone machine recently we had a solder ability issues , so pls guide me ,how to set rts profile parameters
Electronics Forum | Sat Sep 22 09:07:56 EDT 2001 | davef
Back-stepping a bit. If a profile is being used to: * Set-up the oven for a new product or trouble-shooting process, the profile should be taken with a solid contact to a solder connection. * Monitoring on-going stable and in-control process that re
Electronics Forum | Fri Sep 21 09:29:49 EDT 2001 | steven
when taking a reflow profile, can i attach the thermalcouple to the component body (using high temp tape) instead of to the leads (often found thermal couple dettached during reflow). in general, what is the temp diff between these 2 locatinos. if so
Electronics Forum | Sat Sep 22 14:33:50 EDT 2001 | Tony
I like to secure the thermalcouples with a small dot of chip-bonder(surface mount adhesive). The chip-bonder will cure durring the first pass through the oven. After I have developed my profile I remove thermalcouples and the chip-bonder with a solde
Electronics Forum | Tue Oct 09 11:52:41 EDT 2001 | vance
does EFD have a website? -vance
Electronics Forum | Tue Oct 09 12:40:15 EDT 2001 | random7
check out ECD.com for temprobes.