Electronics Forum | Thu Aug 01 13:45:10 EDT 2013 | cyber_wolf
Message me your UPS account # and a ship to addr.
Electronics Forum | Thu Aug 01 13:48:13 EDT 2013 | cyber_wolf
They have been claimed. Thanks
Electronics Forum | Sun Sep 27 11:41:13 EDT 2009 | rajeshwara
We are using ST Demodulator QFP in our product which have exposed pad / heatsink from bottom side. Visually or in magnifier the solder joint or fillet looks good but if we touch up the pins with soldering guns , PCB works fine.
Electronics Forum | Fri Oct 30 08:24:12 EDT 2009 | rajeshwara
thnx davef & all With the help of all at last i solved the problem , The vias are not caped from bottom , so solder paste draining through the via to the floor which creates voids between IC ground pad and e-pad. Tnhx all again
Electronics Forum | Thu Oct 01 06:22:48 EDT 2009 | rajeshwara
We approved the Reflow Profile from Cookson Solder Paste Manufacturer we are using. Now I am suspecting on method of vias designing below that QFP.There is exposed pad for that QFP and we print solder paste there , but when i see under x-ray there is
Electronics Forum | Mon Sep 28 16:15:57 EDT 2009 | davef
That your solder connections reflow properly when heated with a soldering iron, indicates that that your reflow recipe needs improvement. * Thermocouple the pads that require touch-up and adjust your oven recipe to assure that they reach liquidous+20
Electronics Forum | Thu Oct 01 08:34:50 EDT 2009 | davef
First, the reflow thermal recipe provided by your paste supplier is only a ball park guess. Beyond that, the temperature measured by thermocouples on your oven heaters are only loosely related the temperature of solder paste on your board. You need t
Electronics Forum | Mon Jun 19 23:08:01 EDT 2000 | Hermie
I'm looking for a Remote Camera Box for QUAD C series machines. Quad sells this in a kit (Box and Camera). I just need the Box. Can someone tell me if there's any CO. where I can buy just the Remote Box itself alone?
Electronics Forum | Fri Jun 24 12:29:40 EDT 2011 | deanm
Manoel, No, we do not use Totech dry boxes. Just another name to consider.
Electronics Forum | Wed Jan 02 09:41:00 EST 2019 | jdengler
Open Proper Editor in the IP2 Machine box On the right side you will see boxes Near the bottom 1 box would be MTU Click on that. Load data from file. Send to machine. Jerry
