Electronics Forum | Fri Dec 06 06:02:25 EST 2013 | luciano
Thanks for the advice!
Electronics Forum | Tue Jan 29 16:54:17 EST 2019 | slthomas
There's always flying probe, although it's not particularly cheap.
Electronics Forum | Thu Nov 21 11:10:07 EST 2013 | luciano
Hello, We've just started using VIGON A200 in our Aqueous Trident XLD system and observed that aluminium electrolytic capacitors get corroded. Concentration was set at 20% and washing is done by spray at 150F for 6 to 8 minutes. Then is rinsed seve
Electronics Forum | Tue Nov 30 15:38:27 EST 1999 | Wendy Casker
Hi, I am looking for land patterns for 0612 and 0508 chip capacitors. Because they are not standard (yet) package sizes, i am having trouble finding a standard land pattern. (If you don't know what these are, picture a 1206 or an 0805 with the te
Electronics Forum | Tue Jan 29 20:33:52 EST 2019 | deanm
First, you cannot measure capacitors once they are soldered onto the board. Second, why must you measure? Verify your machine set up by using intelligent feeders (if your machine has them) or a checklist, preferably by two people. If you cannot trus
Electronics Forum | Thu Nov 21 12:06:16 EST 2013 | rgduval
The last time I got corroded parts out of my wash was when my DI tanks were spent, and I was pretty much using straight tap water. Refreshing the DI tanks eliminated my issue. Hope this helps. cheers, ..rob
Electronics Forum | Thu Nov 21 12:22:44 EST 2013 | luciano
Thanks for the tip! The DI tanks are brand new. Water quality is pretty good. The filtering is also good and the instrument in the water recycler measures about 12MOhm resistivity. Cheers, Luciano.
Electronics Forum | Tue Nov 26 06:33:09 EST 2013 | luciano
Hi! I haven't found any info about that product. I can't even find it among Zestron products. Could you tell me where to find some info about it? Thanks!
Electronics Forum | Tue Nov 26 08:57:03 EST 2013 | processman
Hi, Its a zestron product which we have used for many years, speak with Zestron and i m sure they will assist.
Electronics Forum | Tue Dec 03 10:22:25 EST 2013 | cpitarys
Insure your rinses are only 25 to 30-seconds each. Also there are options for cleaning solutions from Kyzen that are safer on AL and do not require dosing of any additional inhibitors.
