Electronics Forum | Tue Dec 12 13:45:23 EST 2000 | justin m
Dross removal is dependent upon the "activity" in your solder pot and the usage of a inert or an "air" atmosphere. The more moving parts that agitate the solder and expose it to air, the more dross. Basics first and then the answers will make sense
Electronics Forum | Fri Mar 05 19:17:00 EST 2004 | Ken
I have had OSHA strap accumulative "sniffers" onto wave operators and maint. tech's. THe sniffers collect air bound particulates and trap them into a filter. Later the filter is analyzed and an operator exposure rate is determined. They also will la
Electronics Forum | Tue Dec 12 13:33:52 EST 2000 | justin medernach
Dross removal is dependent upon the "activity" in your solder pot and the usage of a inert or an "air" atmosphere. The more moving that agitate the solder, the more dross. Basics first and then the answers will make sense. What is dross? Oxidatio
Electronics Forum | Tue Dec 16 15:43:26 EST 2008 | fctassembly
Converting your machine from lead to lead-free can be performed in a few steps: 1)Ensure the solder bath is up to temperature 2)De-dross the solder bath 3)Remove pumps/ flow ducts; etc. clean very well- set aside 4)Purge leaded solder 5)Remove as muc
Electronics Forum | Tue May 02 01:42:02 EDT 2006 | ge_lim
Hi Anyone has used Kera-clean Dross Ex to clean the dip soldering nozzle before? This product is from Kera-Technik@gmx.de, GmbH, Germany, and has been quite effective in removing the dross residue on the nozzle. Tell me is there a similiar product
Electronics Forum | Mon Jan 31 12:24:24 EST 2000 | Dave F
Robert: Several points: 1 Dross is a mixture of various things with no "fixed" composition: � The obvious things are metal oxides mixed with metal and this can vary in color with temperature and composition - remember some intermetallic oxides form
Electronics Forum | Wed Nov 10 11:31:06 EST 1999 | John Thorup
Hello Horace You're lucky in that you have two of the same machine. You should be able to arrive at the root of the problem by comparison. The problem is likely to occur in one or more of these areas: MACHINE: As said , pump speed and air contact ar
Electronics Forum | Tue Apr 18 06:15:49 EDT 2006 | JH
AJ, I have had the Solder Saver on trial a couple of times and reached the same conclusion both times - it is not for us. However there are benifits for some users. In case you dont know how it works, here is a brief explanation; The hand held to
Electronics Forum | Sat Oct 09 03:26:58 EDT 1999 | Brian
| Always experiencing dross in pot with different characteristic such as color, shape, dry/wet etc. Any paper, wetsites provide the more comprehesive explanation on its characteristic | Dross is a mixture of various things. The obvious ones are met
Electronics Forum | Thu Jun 08 16:03:52 EDT 2006 | jbrower
On Saturday the 3rd, I offloaded nearly 1200 pounds of solder from my Electrovert, did the tin purge and loaded nearly 1200 pounds of sn100c back into my solder pot. It was a hell of a job, but we got it done in 8 hours. We've been running with this