Electronics Forum | Wed Jan 30 09:37:28 EST 2002 | clarkk
Does anyone out there have experience dispensing solder paste with a Universal GDM (4716AL) with positive displacement pumps? I'd like to hear any comments on the success or failure of the machine to dispense consistently, effect of temperature varia
Electronics Forum | Wed Jan 30 12:22:06 EST 2002 | jax
Clark, The universal GDM should handle your application with ease. Although not as accurate as an archimedes screw, the positive displacement pump of your GDM will still be well within any tolerances if maintained and operated properly.. Not to me
Electronics Forum | Thu Jun 25 10:56:48 EDT 2020 | kumarb
Hi. Contact PVA in the US. Our company has been a supplier to them for many years to date for the adapters used in their machines. This is their vertical. Hope this helps.
Electronics Forum | Sat Aug 21 02:27:21 EDT 2010 | isd_jwendell
The paste you dispense will not solder the same as the one you use with a stencil. The paste for the stencil will have a higher metal content. I was not working with dispensing as small as you are, but after evaluating the cost of the stencil vs. lon
Electronics Forum | Fri Nov 01 20:24:15 EDT 2019 | dekhead
> Machine Setup >> Options >> TTG & BTG Enable
Electronics Forum | Mon Mar 16 14:58:22 EDT 2020 | tnachamp
Thank you for the response. It is strange that the TTG & BTG option is available on our other DEK but is not in this particular DEK. Both machines have the same software and version.
Electronics Forum | Mon Nov 15 15:31:54 EST 2004 | GP
We are looking for machine that can do the following: bonding of 0.5x0.5x0.8mm mm cramic part. - detect target surface position 1.5x0.8mm - dispance a drop of 0.8mm of epoxy adhesive on trget surface with position accuracy of +/-0.04mm. - pick the 0.
Electronics Forum | Sat Apr 18 10:29:47 EDT 1998 | Steve Gregory
| Have mixed technology board and am interested to hear any info on the Nordson non-contact adhesive dispenser. | I woud appriciate any feedback I could get. I am currently using a contact system and am tired of breaking needles and need a way to spe
Electronics Forum | Tue Sep 22 20:08:58 EDT 1998 | Dave Brand
Rick: I'd be happy to give you information on the system benefits and limitations. I work for Asymtek so please email me back so we can talk off-line. Thanks. -Dave Brand | | | Have mixed technology board and am interested to hear any info on the No
Electronics Forum | Wed Nov 24 12:15:03 EST 2010 | clarence
Thanks for your offer to help. Fortunately we were able to locate a set of manuals on CD.
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
611 Hollingsworth Street
Grand Junction, CO USA
Phone: (970) 245-0408