Electronics Forum | Sat Jan 14 18:07:15 EST 2006 | Sona
I am looking for someone on the East Cost to service the following equipment. Electrovert EPK and DEK 260. We need to also add some convection heaters on the wave machine. We are located outside Philly, Pa If anyone can provide me with this info I a
Electronics Forum | Mon Oct 14 15:48:37 EDT 2002 | pjc
If you are concerned with the actual temp of your pre-heater verses what the machine's display "says" the temp is, use a calibrated digital thermometer and place the thermocouple probe inside the pre-heater and next to the machine's thermocouple for
Electronics Forum | Fri Feb 17 07:18:52 EST 2017 | emeto
It looks like your troubleshooting got you to the solution. I can't think of anything I would do next, but change the heater.
Electronics Forum | Fri Apr 24 13:33:25 EDT 1998 | Scott Davies
I inherited a DI system that's um...not in good shape. I would be forever indebted to anyone who could help me with several problems related to this. Flow rate 3.5-5GPM Incoming pressure:50PSI Application: deionized water provided to Electrovert H-4
Electronics Forum | Tue Jun 25 22:22:22 EDT 2019 | proy
We have an electrovert 16" econopak wave solder machine with two identical pots (exchange between Tin Lead and Lead Free). When the pots are exchanged the same thermocouple is used, and the same controller is used - with the set point adjusted. The S
Electronics Forum | Sat Jun 26 21:17:34 EDT 1999 | Bob Huelsenbeck
Anyone having any conveyor rail shaking on Electrovert wavesolder machine model "Electra"? The conveyor shakes more with a pallet passing through the machine, particularly when the 20" pallet is passing from spray fluxer to the first pre-heater. Here
Electronics Forum | Fri Jan 21 15:33:43 EST 2005 | Mark
>Hours mean nothing on these machines. Correct me if I am wrong but isn't it true that heaters and blowers (maybe valves) have a specific lifespan? I would think that parts in an oven with many hours on it are due to fail sooner than those in one wit
Electronics Forum | Mon Oct 17 14:00:14 EDT 2005 | ricardof
for sure it's an excelent topic, in Mexico we've used almost any brand in the market (Research, Heller, Electrovert, Rhem, Vitronics, Conceptronics, BTU) and after all those names, we could see that Vitronics is a good opton, good service, not too mu
Electronics Forum | Thu Feb 16 20:55:57 EST 2017 | youngbuck
Was wondering if anybody has experience a zone that will not get up to temperature. I changed the Solid state relay, made sure the thermocouple is working. The only thing I can think of is the bottom heater panel has a corroded/broken wire which is a
Electronics Forum | Sat Sep 26 02:09:39 EDT 2015 | aemery
Proc My field service back ground included Electrovert so I know reflow electrical quite well. I've worked on Heller, Conceptronic and Vitronics over the last few years and really there isn't a huge difference if you can read a schematic. I checked