Electronics Forum | Mon Sep 23 05:57:55 EDT 2019 | uzbek
Hi all, we have the opportunity to buy used Essemtec FLX2011 PnP machine. The machine is made in 2009 and the last two years it wasn't used. With the machine, we would get some feeders and all nozzles. Moreover, we would get the library from the EM
Electronics Forum | Sat Sep 28 15:10:58 EDT 2019 | saucyshawn
Having used an FLX2010 for many years and having upgraded it to vision I would hesitate on the BGA, 0402 and no chance on the 0201. Essemtec makes a good machine, the user interface is awesome. But feeder take a long time to load, can become problem
Electronics Forum | Mon Mar 27 13:37:44 EDT 2023 | spoiltforchoice
I haven't run either. However when were looking at machines; MyData (MY100) was exactly the class of machine that fitted our use case. There were plenty of installations with comparable use cases to ours and plenty of those have multiple lines and ar
Electronics Forum | Sun Mar 18 17:46:10 EDT 2018 | spoiltforchoice
You've got (to my mind) 3 wholly different classes of machine there. Essemtec is upper entry level maker that is increasingly differentiating itself from the competing machines in its class by focusing on 3d assembly/dispensing options. The Puma als
Electronics Forum | Thu Dec 21 08:56:38 EST 2017 | spoiltforchoice
.....cheaper than the big fish..... For Lowish volumes,as mentioned Autotronik/Borison is widely available and pretty competent. Evest make some really generic pick and place machines, they do the job but modern bells and whistles like smart feeders
Electronics Forum | Wed Jul 16 05:16:49 EDT 2014 | spoiltforchoice
This number is going to vary hugely depending on the machine, how you operate and how many feeders you have. Smaller outfits might have a single operative whose job it is to setup, load, run & program the line. Regardless of how changeover focused t
Electronics Forum | Thu May 15 23:13:26 EDT 2008 | sarason
The Essemtec has a very cheap to manufacture feeder which you could adapt, or try one of the feeders that remove the tape by "ploughing" it off. Can't recall the brand right now. They are well made, but very cheap to make. The laser gets you speed. T
Electronics Forum | Fri Jun 26 22:48:45 EDT 2020 | spoiltforchoice
> > why not get an older essemtec or neoden? > I <BR> > believe both run on 110V. > <BR> <BR> Thanks so much for the > Essemtec hint! Their Fox 1 really looks like it > suits my needs! 18 mm compon
Electronics Forum | Wed Feb 13 07:00:59 EST 2013 | spoiltforchoice
Low-Medium volume and Low Budget are difficult for others to quantify. I'm not familiar with GEM's but if the AX-201 suggested above can use your existing feeders its obviously got a leg up on the competition. Otherwise, to some extent your choice mi
Electronics Forum | Mon Sep 23 07:40:17 EDT 2019 | spoiltforchoice
A fair price.... well its the feeders that retain value. I know if you were to sell an Essemtec distributor a machine with say 10 banks of CLM feeders that old, they would give you perhaps only £10k. Refurb CLM feeders are ~£3k gbp (or about 1/2 of n