Electronics Forum | Thu Jul 30 10:59:05 EDT 2015 | emeto
Hi, I had similar problem on my Dage X-ray machine. I had to reinstall the firmware for the Nextmove card. Check your CDs you have with the machine and you should have a software(and manuals) which you will use to reinstall the firmware on your cont
Electronics Forum | Wed Sep 27 23:34:08 EDT 2017 | heros_electronics
Why don't you look > here: https://support.dialog-semiconductor.com/fo > rums/post/dialog-smartbond-bluetooth-low-energy-%E > 2%80%93-software/bluetooth-programing Hi Deni, thanks for your help. Can you recommend any firmware burner for DA14586?
Electronics Forum | Mon Oct 18 08:05:39 EDT 1999 | Doug
Is your firmware version 1.95? In the pd section, do you have the field "auto offset" enabled? Just a couple of things to look at.
Electronics Forum | Fri Mar 19 11:11:04 EST 1999 | Greg
| | | Here is my question. We have several fuji CP's in our shop, every once in a while the first couple of parts placed are off the pads. When we move the parts further down in the sequence they are fine. What is going on? Has anyone had this proble
Electronics Forum | Mon May 06 10:27:22 EDT 2002 | JCC
What version is your firmware?? This error can be caused bt something as simple as the background nozzle disks. Are you using the old style or the new vinyl ones?
Electronics Forum | Thu Oct 16 10:02:12 EDT 2003 | marcelll
Hello All We have here a Conceptronic oven running under Win 3.1 and the password have been lost. Is there a trick to find it in some files or do we have to reload the firmware ? Thanks
Electronics Forum | Fri Apr 07 03:10:20 EDT 2006 | Roland G
Check firmware version and Fuji upgrade reports because it could be a sofware bug. I remember also 1 random failure on IP1 which was hard to identify: a cable in raceway connected to placement table was getting contact failure when table moves.
Electronics Forum | Wed Jan 12 07:22:02 EST 2011 | jmw
To add the camera to the machine would have a lot involved......including possible software/firmware upgrade. I would say buy a machine that already has it on it. To find the parts and upgrade it would probably cost more than the machine is worth. Ho
Electronics Forum | Mon May 16 15:00:53 EDT 2011 | bobpan
Sorry about taking so long to respond.......The quadalign is a retrofit. You cant just buy a quad-align and mount it on the machine. There is different firmware,cables,and other stuff. Good luck
Electronics Forum | Fri Nov 04 13:08:32 EDT 2011 | dwoodbury
Hi. We are having problems with what appears to be the firmware for our QP341 machine. It will not allow us to calibrate or change any settings for the pick-up-point on the tray unit. We are following the procedure in the manuals but it is not workin
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Manufacturer / Consultant / Service Provider
3240 Scott Blvd
Santa Clara, CA USA
Phone: +1 408 980 0400