Electronics Forum | Mon Feb 21 04:04:21 EST 2005 | abhirami
1.67 always on the sample boards measured. This is very fast and pretty good measurement for a paste dispense control. Boards do not stand out-side for long times. Inspect the height for critical components only, in the initial stages. Once your Cpk
Electronics Forum | Tue Feb 22 07:58:16 EST 2005 | davef
We hear you. If it's not broken, why fix it? Right? Well intentioned, but not very educated customers seems to be part of the bane of existance of process engineers at contractors. First, as a previous poster said, paste height is an improper mea
Electronics Forum | Thu Mar 17 09:34:10 EST 2005 | sumxp
What is the spec limit setting for solder paste height control in your area.Is it +/-2mils for 6 mils stencil? Tx
Electronics Forum | Sat Nov 25 22:24:42 EST 2017 | hemant_pang
Hi , Can anybody knows about PTS system Singapore who manufacturer of solder paste height inspection machine ZC 1000, we need control card of the machine, not able to get contact information of manufacturer Please share if you have some info
Electronics Forum | Sun Feb 27 16:25:51 EST 2005 | jakin
Hello my name is Jason. And I to work in electronics. I have recently had the same inquires by costumers about solder height to. Are these well-known customers like hp or micron? Cause it sounds like it to me. Who do you deal with that makes these in
Electronics Forum | Wed Mar 04 15:26:07 EST 2009 | clampron
Hi Jorge, Take a bare board and measure over the same pad. We have had similar issues with a higher deposition than the stencil thickness. In some cases, we have found that the top of the pad was higher than the solder mask. Our inspector uses the b
Electronics Forum | Thu Mar 05 13:03:07 EST 2009 | smtnet51
Are you using HASL PCB's? Try measuring a bare board and compare.
Electronics Forum | Thu Mar 05 20:32:17 EST 2009 | davef
Most likely, placing components will smush the higher points on the edges of your paste deposit
Electronics Forum | Tue Aug 04 06:49:12 EDT 2009 | davef
solder paste inspection SMTnet => search the fine Archives
Electronics Forum | Tue Aug 04 13:59:51 EDT 2009 | ck_the_flip
Is this topic on Wikipedia, Facebook, or MySpace as well?