Electronics Forum | Tue Sep 09 06:57:52 EDT 2003 | cyber_wolf
Yes I have cleaned the nitrogen knives out, and I have a chiller hooked to the heat exchanger(radiator).I am starting to think that I need to replace the radiator with another blower...??? Thanks for the input. Regards, Sr.
Electronics Forum | Fri Nov 19 13:00:06 EST 2004 | russ
Hook it up to a server and only allow read access to the operators for the files. Then if changes have to be made it will take the appropriate person to overwrite the file and save it to the server drive. Russ
Electronics Forum | Mon Dec 06 21:41:13 EST 2004 | pdeuel
I have the same problem but an MPM downstream of the Fuji. Im looking for schematics for this Fuji. Before we had another machine hooked to this Fuji and the output switch needed to be set to latch. Otherwise only a pulse was seen and it was not long
Electronics Forum | Tue Sep 20 15:43:27 EDT 2005 | fastek
You're having the same error/problem on three seperate machines? Are you sure they are properly hooked up?
Electronics Forum | Tue Sep 20 16:44:54 EDT 2005 | jasont
Hi Rick, Yes, we had been moving PPU's back and forth between machines and they are properly hooked-up. Please let me know if you have any idea's, places to refer us to for a fix, replacement. Thanks, Jason
Electronics Forum | Thu Dec 15 13:01:25 EST 2005 | jdumont
I have never seen the image quality on the Ersa but the SMT Tools scope we have is definately good enough for spot checks. I have it hooked into my laptop to capture images which works ok.
Electronics Forum | Fri Apr 21 16:55:16 EDT 2006 | Geo E
I am trying to find out if the AP20 MPM Printer is SMEMA ready or was it an Add-on, I can not find any documentation in the manual as to where the Smema is to be connected.Or does the diagrams show any smema hook ups. Any help would be appreciated.
Electronics Forum | Thu May 18 11:55:15 EDT 2006 | RLM
Is a Juki feeder a stand alone unit or does it need to communicate with the assembler ? I can operate a Quad feeder just by hooking it up to a proper voltage source. No need to communicate with a computer. If the Juki's will operate this way maybe I
Electronics Forum | Thu Jul 27 15:59:36 EDT 2006 | russ
test at the bare board level consists of opens and shorts. It makes sure that all traces are hooked (connected) up to the appropriate place and they are not shorted to a non common conductor. Russ
Electronics Forum | Thu Nov 30 13:41:04 EST 2006 | john_smith
Pete, We have 2 Vapor Phase ovens and use a profiler from Data Pak that has a sleeve that seals out the Vapor for these ovens. This is pretty much the only system that we have found for these kinds of ovens. Contact them and they will hook you up.Tha
