Electronics Forum | Fri Jul 27 21:17:10 EDT 2001 | Mike Kennedy
We are looking at another pick&place machine for our production line and are leaning towards the Juki2000 series and the YamahaYV series machines. I would like any feedback from those in the industry who have used either of these machines. Also we cu
Electronics Forum | Sat Aug 04 17:46:22 EDT 2001 | Marshall
The YV100X is Phillips TopazX in the U.S. while the YV88 is the Emerald. Now, We find the Juki's 2020 and 2030 more superior than Yamaha's or Philip's because of their flexibility in component handling and the standard features that come with the Juk
Electronics Forum | Thu Oct 04 00:03:28 EDT 2018 | gaintstar
flason smt pick and place machine: http://www.flason-smt.com/product/Hanwha-IC-placer-SM321-High-Speed-SMT-Modular-Chip-Mounter.html http://www.flason-smt.com/product/Hanwha-Pick-and-Place-Machine-DECAN-F2-High-Speed-SMT-Modular-Chip-Mounter.html htt
Electronics Forum | Thu Dec 01 16:29:18 EST 2005 | JW
Just want to thank you all for the great advice > to this thread!! SJ, Have you considered Juki SMT equipment. We are a small/mid volume, high mix OEM and we have had great luck with both the previous 700 series and now the 2000 series placement m
Electronics Forum | Tue Jan 19 04:53:21 EST 2010 | ptxems
The UK office could offer that software, but its not really worth it as it still requires a lot of further input. Think its just going to be a case of reprogramming all the boards!!! You can transfer from 700 to 2000 series, but not 500 to later mo
Electronics Forum | Fri Jan 05 07:38:52 EST 2007 | John Burris
I would concur with the above comments. We have used Juki/Zevatech from the 570L model on and run a full complement of 700 series machines. I have a 10 year old 730 machine that still cranks out product every day over two shifts without problems. Yo
Electronics Forum | Thu Sep 27 10:20:46 EDT 2001 | John S
The feeders on the Juki 750 machines have about 0.060" slop in the x-axis. Which allows the machine to try to pick up the part on the edge,inverting it. With the auto-correct feature enabled, the machine locates the feeder pocket based on its pick
Electronics Forum | Sun Jun 17 09:48:05 EDT 2018 | sarason
I presume the dongles you talk about are for an application called HLC from JUKI. The 2 different versions are for the later 2000 and 3300 and FX series the other key for the older 700 series. There is another way to solve your problem. AN applicatio
Electronics Forum | Tue Sep 02 18:49:05 EDT 2008 | jlawson
Juki machines generally are great machines for reliablity and maintaining overall accuracy as they have full linear (mag-scales) encoders on XY axis and self calibration features. Laser centering has its pros and cons - mostly pros, but can have iss
Electronics Forum | Tue Jun 10 22:57:18 EDT 2014 | demzvill
Our observation also is that the tape size is too big for the chip which allows the tape to move around. With this i would like to know if there is is a setting in the machine that would slow the feeding rate. We are using juki mounter 2000 series. A
WINTECH provides new/used/pre-owned SMT, AI & PCB Assembly (PCBA) equipment of various brands. Also supply service, modification & original or local-made spare parts. We are also an appointed agent for well-known brands.
Equipment Dealer / Broker / Auctions
NO. 1 LORONG SAGA JAYA 6
PERAI, Malaysia
Phone: 6043809899