Electronics Forum | Wed Jun 13 06:10:08 EDT 2012 | bobpan
When fiducials on pcba's have poor plating and the vision cant find them repeatably there are a couple of things you can try. 1. Use the WAVI light and turn off (setting of 1) the main bright LED ring on the downward camera. After doing this in teach
Electronics Forum | Tue Feb 24 15:32:10 EST 2015 | swiese242
Hi there. I have an IP3 machine that refuses to > power up the MFU cart on side 1. I have already > replaced the I/O card but still no dice. Is > there a relay or fuse that I need to check to get > this to power up? The machine will not operate
Electronics Forum | Fri Oct 27 12:54:04 EDT 2006 | mika
Hi, This a common problem with the GSM P2P cameras, once in a while chip gets between the "protecting?" glass and the led-cards surronding it. It has happen to us several times (we have 2.6 & 4 mil/pixel cameras ring lighting, but it is the same lig
Electronics Forum | Thu Jul 25 16:20:59 EDT 2019 | bobpan
Top red led is on or off depending on version of tep board. The green leds light when the transport sensor that it communitcates with is seeing a board over it. Tep controller init failure can be one of the following. 1. Check reseat tep card and
Electronics Forum | Tue Sep 19 22:45:19 EDT 2006 | darby
Larry, The Quad is based on the Samsung - yes? If so, here are the final recommended answers from Samsung. All LM guides and bearings, ball splines and rack and pinion use Shell Alvania EP2. Sometimes called LF2. Sometimes called Albania. It's a dar