Electronics Forum: matrix tray changer (Page 2 of 15)

Need to find stationary matrix tray feeders at a good price

Electronics Forum | Fri Aug 21 16:15:09 EDT 2009 | drakealvarez

Define "good price". Throw out a number. Good price - One feeder around $2,000.00 & under if possible would help very much. -Aortiz

Need to find stationary matrix tray feeders at a good price

Electronics Forum | Tue Aug 25 16:35:36 EDT 2009 | drakealvarez

Universal G.S.M. single beam, head A1 (four spindle) -Aortiz

Need to find stationary matrix tray feeders at a good price

Electronics Forum | Tue Aug 25 18:25:15 EDT 2009 | swag

If you have access to a machine shop you can build your own easily using the same bolt/tooling pin pattern as tracks. Place them on a vibratory track base and disconnect or turn the vibe down.

Topaz tray feeder

Electronics Forum | Fri Dec 17 09:05:55 EST 2004 | adlsmt

Has anyone designed a Topaz matrix tray holder? We only need something to hold 4 trays and the Assembleon system is expensive and marginal. We can do it here but if someone else has done it would be happy to share the engineering costs to get some dr

"cut tape" tray

Electronics Forum | Tue Nov 17 10:55:17 EST 2009 | tpappano

I have a CSM84VZ, so I was thinking of a device that could be placed on it's "manual tray feeder" instead of one of the 9" wide plastic matrix trays that TQFPs, etc. are supplied in. The machine would be programmed to pick parts from several single-

Mydata's handling matrix trays ?

Electronics Forum | Fri Apr 15 08:23:14 EDT 2005 | cyber_wolf

We are seeing more and more jobs come in with matrix tray parts for our mydata machines. The problem is that the largest Y wagon will only hold 3 or less trays. We have some jobs that have 10+ trays. Currently our operators cut the trays down to sma

Mydata's handling matrix trays ?

Electronics Forum | Thu Apr 28 01:30:07 EDT 2005 | Marv

The Tray wagon on a Mydata can be any table width you desire, a one bay holds two trays, a two bay holds five, and a three bay holds seven. The tray wagon can be removed in about a minute flat. the TEX actually only requires two slot positions to h

Mydata's handling matrix trays ?

Electronics Forum | Thu Apr 28 11:13:33 EDT 2005 | cyber_wolf

We currently have Fuji's(IP3's included) and Mydata's in our SMT area , so training is not an issue. The reason I was thinking of an IP3 is because they seem to be available for 50K or so. We cannot afford to loose any mag positions on our Mydata's t

Mydata's handling matrix trays ?

Electronics Forum | Thu Apr 28 16:12:30 EDT 2005 | stepheniii

I was going to say something about being carefull to not replace part trays with full trays and to make sure where the pickup location curently is. I think we had a tray of parts drop, then there were restrictions on who could load trays. When I work

Mydata's handling matrix trays ?

Electronics Forum | Thu Apr 28 08:04:45 EDT 2005 | stepheniii

I like Mydata, Fuji, and Panasonic equipment. However if you have one, I"m not a fan of mixing. I have worked with the IP3 with MTU. I found it a good solid machine. The only thing at that time was the programing. I believe they have changed thi


matrix tray changer searches for Companies, Equipment, Machines, Suppliers & Information