Electronics Forum | Wed Jul 08 16:28:25 EDT 2020 | duchoang
OSP board finish is the issue. With OSP microBGA board, we need to have enough paste (enough flux) on pads (small pads on BGA), also we need to have strong, more activate flux to get rid of Preservative layer on top of pads. In this case, the OSP did
Electronics Forum | Mon Jul 26 12:55:34 EDT 1999 | M.L
Presently protos of micro-bgas (80i/o) pitch .030/.031 12BGA per assembly The board is a (.062, 4 layers) FR-4 using Dry film Pads .014inch Vias within footprint .020inch Vias to be filled by bottom side(solder side) only .030in dia. Force via plugg
Electronics Forum | Wed Jun 06 16:51:06 EDT 2001 | jax
Unless your placing micro-bga, board edge fiducials on alternating corners will provide more than enough placement correction ( Micro-bga's should also be fine depending on how your equipment maps the board ). The part data and vision recognition nee
Electronics Forum | Tue Sep 21 11:28:26 EDT 1999 | Dave F
| I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | The stencil is 6 mil thick, laser cut and electo-polished. | The apertures are 12 mil in diameter with 20 mil pitch. | We are usi
Electronics Forum | Tue Sep 21 13:43:33 EDT 1999 | Glenn Robertson
| I've had some trouble pasting a test board for a MicroBGA trial. Most of the paste remains in the stencil apertures. | The stencil is 6 mil thick, laser cut and electo-polished. | The apertures are 12 mil in diameter with 20 mil pitch. | We are usi
Electronics Forum | Fri Jul 30 15:22:52 EDT 1999 | M.L
| Looking for solder paste specification limits which have reliability data to support them. Currently, we are looking to define the min/max volume necessary to ensure a good joint on CBGA, PBGA, and Micro-BGA's. Any information will be greatly app
Electronics Forum | Mon Jun 29 13:44:45 EDT 1998 | Russ Miculich
The mini-BGA was to be smaller than the standard BGA and larger than the micro-BGA. The last I heard there will be no mini BGA but companies such as Tessera, AMKOR-ANAM, etc. will go directly to supply 0.020" center to center pitch micro-BGA's. You
Electronics Forum | Tue Mar 17 07:35:37 EDT 2009 | nagesh
We have the IC placer Fuji-IP3 machine.Can this machine be able to place MicroBGA / BGA with good vision system.My card has almost 8 BGA with 4 MicroBGA?Still now i had placed 1 or 2 BGA(Placement by body centering).In this machine the Y- table keeps
Electronics Forum | Thu Jun 29 09:12:27 EDT 2000 | sree
What is the best aperture opening for micrBGA with 0.8 mm ball pitch and 16 mils ball diameter?The pad size on the PCB is 12 mils.
Electronics Forum | Tue Aug 17 09:11:15 EDT 1999 | Mario
Looking for users of the Emerald pick and place.Comments on that equipment would be greatly appreciated. QFP and micro-BGA placement, idiot proff software etc. We just got a good offer to use that equipment for our training center instead of our pre