Electronics Forum | Fri Feb 25 05:42:17 EST 2000 | Istv�n Dominik
Hi, We should wavesolder a PLCC44 package. The PCB is under the design procedure now and we must specify the best parameters (the orientation (45 or 90 degrees) of the package on the PCB,the number, the positon and the size of the solder thief pads
Electronics Forum | Fri Feb 25 05:42:17 EST 2000 | Istv�n Dominik
Hi, We should wavesolder a PLCC44 package. The PCB is under the design procedure now and we must specify the best parameters (the orientation (45 or 90 degrees) of the package on the PCB,the number, the positon and the size of the solder thief pads
Electronics Forum | Tue Oct 29 15:25:12 EST 2002 | russ
Thanks for the info, I have previously not used the Ps and Qs so to speak and I am finding now that we are running into trouble mostly due to component height and body sizes. So for example we currently have "16 pin SOP" what we need is "16 pin SOP,
Electronics Forum | Fri Sep 27 08:36:27 EDT 2002 | alewis
We are a manufacturer of placement machines and I believe that you asked if there was a reference that can be used to determine the tape sizes for most SMD packages. We review the catalogs from Practical Components and Top Line to determine tape size
Electronics Forum | Thu Sep 26 15:33:04 EDT 2002 | genny
Does anyone know of a handy dandy reference guide showing what the standard feeder tape size is for most common SMD packages? Just trying to figure out what the capacity REALLY is of all these pick and place machines I'm looking at, that state capaci
Electronics Forum | Wed Oct 30 09:28:50 EST 2002 | gregp
How about your designator actually contains size info in a code. For example, SO14-237-050-090. That is "package type" - "width" (over leads) - "lead pitch" - "thickness". The problem with this is a great deal of thought has to be put in before comm
Electronics Forum | Mon Jul 10 20:59:02 EDT 2000 | Dave F
Try: View Mate (View only) - http://www.lavenir.com CamCAD (View only) - http://www.camcad.com GC-Prevue (View only) - http://www.graphicode.com PC Gerber II (View & limited data size editing) - http://www.ecam.com/us_home.htm While I've posted "vi
Electronics Forum | Tue Oct 24 13:41:25 EDT 2006 | jax
Everybody who uses basic "part-type" naming conventions for machine package codes will have this same issue unless restrictions are placed on who, how, and when the package codes can be altered. Some alternative methods to solving this problem: 1. U
Electronics Forum | Fri Sep 27 15:07:50 EDT 2002 | barryg
Genny, you may want to look at the brds you will be running and identify the various packages. I do not know what a standard package is. Most chip resistor and capacitors, 0402, 0603, 1206, 1210's are on 8mm feeders, but ic's vary quite a bit. Also r
Electronics Forum | Fri Jan 17 21:17:18 EST 2003 | Grant Petty
Hi, Our paste release problems have been solved, and we worked on the stencil, and things are working well now. However this board was designed before we knew what was going on, and we thought a little more size on the pads would be a big help. Is