Electronics Forum | Wed Sep 13 13:35:06 EDT 2006 | Mitch Crumbstein
It took me awhile to "warm up" to KIC 2000 as well, as I, too, am an old lead-head from way back who used to profile with an old MOLE that used DOS-based software. I've also used the old SlimKIC II and Datapaq as well. I guess what he meant by "old
Electronics Forum | Mon Mar 16 12:44:36 EDT 2015 | proy
soldering a very simple board in a very simple Accuheat oven. Can anyone give me basic starting point settings (conveyor speed and temperature) then we will profile using a mole from there. Paste 1) Tin Lead Paste 2) Chipquik low temp TL 165C PR
Electronics Forum | Thu Apr 26 08:29:37 EDT 2007 | pavel_murtishev
Good afternoon, We develop reflow profile ones and control it daily or when recipe changes after that. Modern reflow ovens are usually very stable. This means that your zone temperature set points won�t deviate from initial ones. You can calculate d
Electronics Forum | Thu Apr 26 09:05:16 EDT 2007 | realchunks
Hi D0m0 Can you standardize on your temps and just adjust conveyor speeds for various sizes of the boards? Another trick is to parallel t-couple plug off the actual t-couples of the oven and mount the plug in an easy access point of the oven. The
Electronics Forum | Thu May 03 15:48:56 EDT 2007 | geb
Hi, We run a profile check each time we load a recipe. This ensures that the correct settings have been used for the job. It also gives traceability in the event that you need to prove whether or not the oven temperature was the cause for failed pro
Electronics Forum | Fri May 24 09:34:57 EDT 2013 | markhoch
I run the same profiles for Top and Bottomside assemblies for all of my products. Only in rare instances have I been forced to run a profile with cooler bottom zone settings. This was obviously driven by assemblies with heavier components on the bott
Electronics Forum | Sat Sep 22 09:07:56 EDT 2001 | davef
Back-stepping a bit. If a profile is being used to: * Set-up the oven for a new product or trouble-shooting process, the profile should be taken with a solid contact to a solder connection. * Monitoring on-going stable and in-control process that re
Electronics Forum | Wed May 16 18:09:15 EDT 2007 | johnwnz
It always surprises me how many variations there are for profiling and controlling your ovens, and the thing is most of them are fairly valid. Here's yet another option: Your board profile needs to be specific, 2 boards can look identical but have ve
Electronics Forum | Thu May 17 19:21:39 EDT 2007 | diesel_1t
We are currently using Oven Rider (ECD) to "verify" just the conduct of the peak temperature; we define which product is the higher runner for this line and then with the settings for this product (already profiled with thermal couples attached to th
Electronics Forum | Tue Feb 19 12:28:26 EST 2019 | slthomas
Presumably you're talking about lead free, but you don't say. Heller can probably provide you with a starting point, as rob has already pointed out, but you do need to develop the capability to perform profiling yourself. That oven should have ECD
