Electronics Forum | Mon Mar 28 14:53:43 EST 2005 | russ
Type in "lead free" and search in forum in the search box at the top of this screen.
Electronics Forum | Wed Apr 30 07:39:29 EDT 2008 | realchunks
Is the green box on top of the transformer? If so you can by-pass it.
Electronics Forum | Mon Jan 06 13:49:14 EST 2020 | slthomas
A lot of people also assume that the filtration is for cleanliness of the gasses that are leaving the plant, and that is not the case. I helped spec. (like you, Rob, I let someone else do the math) a system like yours, with a single common main trun
Electronics Forum | Fri Nov 05 18:47:31 EDT 2010 | eadthem
I'm guessing when you say bare board you mean wet paste only? When you say the pads move slightly are your boards warped at all at the Vscore? What we do is use per modual fids. first you delete or don't make panel fids and then theres a option wh
Electronics Forum | Wed Aug 15 18:48:58 EDT 2001 | mparker
I would consider the fab placement in the printer to be of more concern than the pro's and con's of a single foil for top and bottom print. Do to the larger size of the fab you will have to align the top and bottom layers sequentially on the foil. O
Electronics Forum | Tue Nov 15 06:37:43 EST 2005 | cyber_wolf
I ended up buying a MM 7A camera form Techniquip. It was a major pain in the butt adjusting the box to the new camera. I ended up having to send the box and the camera into them so they could set it up properly.
Electronics Forum | Mon Sep 13 10:39:50 EDT 2004 | Marie
Suggest looking at the packaging,is it sufficient to prevent damage to the QFP?. What way are these components stored when received?.Are the reels stored in boxes or racks?.Storage in boxes may cause damage from stacking the reels on top of each oth
Electronics Forum | Sat Jun 17 09:09:15 EDT 2000 | Chrys Shea
Contact the adhesive manufacturer, or their website. Most adhesive suppliers offer two cure options - one with a belt oven profile and one with a box oven profile. The belt oven is usually a ramp and plateau of 120-150C for approx 2 minutes. The b
Electronics Forum | Mon Nov 03 11:58:16 EST 2003 | John
Can anyone recommend a few dry box manufacturers? We are just now getting into moisture sensitive devices. Are there any specific differences in these products to watch our for? The parts we will be using are rated as level 4 in sensitivity. Can
Electronics Forum | Thu Jun 01 09:46:36 EDT 2006 | slthomas
Our MOLE was the same way. Setting it on the floor was the best way to cool it down. I'm not sure you're ever going to do much better than a factory shielding box unless you just build a bigger one and put the whole thing in it...profiler and facto
