Electronics Forum | Wed Aug 19 06:40:06 EDT 1998 | G Thomas
Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. Must be resistant to solvents such as MEK and acetone. Cure below 150C, with possible potential for rework of the conections.
Electronics Forum | Tue Aug 15 07:02:13 EDT 2000 | George Verboven
We are assembling SMD-Leds (Chip LED cl-220yg-c-ts)on flex foil with Electrical conductive glue (Matthey A1401). When we investigated these foils we found cracks between the conductive adhesive and round the edge of the Chip-leds. This cracks cause f
Electronics Forum | Mon Aug 21 20:31:49 EDT 2000 | Dave F
George: I�d like to help, but I�m sorry I�m not familiar with your Matthey adhesive, can�t find information about it on the web, and can not picture the problem you are describing. Please post a picture and give us more detail. At least give us a
Electronics Forum | Sun Sep 10 10:48:46 EDT 2023 | mekmat544
Hello, I have litle bit simply question. I have silver conductive glue in small syringe. Can you help my how should I mix this glue in syringe before using? Thank you. M.
Electronics Forum | Tue Sep 12 14:01:44 EDT 2023 | bryangomez
Thanks for the info..
Electronics Forum | Wed Aug 25 00:10:13 EDT 2021 | sarason
The company that does this is McDermid. There are multiple different ways of doing it. Screen print silver paste onto the mylar, "activate" the film to be conductive, then plate in copper. These processes are found in the patent literature which is e
Electronics Forum | Thu Aug 20 09:19:19 EDT 1998 | JUSTIN MEDERNACH
| Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | Must be resistant to solvents such as MEK and acetone. | Cure below 150C, with possible potential for rework of the conections. MR. T
Electronics Forum | Wed Dec 15 09:00:07 EST 2004 | russ
All of the SMT adhesives that I have used are non-conductive by themselves. I assume that the solder joints are formed by wave soldering?
Electronics Forum | Mon Aug 24 08:44:52 EDT 1998 | Justin Medernach
| | | Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | | | Must be resistant to solvents such as MEK and acetone. | | | Cure below 150C, with possible potential for rework of the conec
Electronics Forum | Sat Aug 22 16:07:31 EDT 1998 | Manuel Cornejo
| | Require a conductive adhesive - either isotropic or anisotrpic - which can be used for 100micron oitch devices. | | Must be resistant to solvents such as MEK and acetone. | | Cure below 150C, with possible potential for rework of the conections.
