Electronics Forum | Tue Mar 21 16:25:23 EST 2000 | Boca
Full radius corners on pads can help with solder paste release in the stencil. The radius shape minimizes the surface area in the wall of the stencil aperture as compared to a sharp corners. When the stencil is seperating from the pcb the solder pa
Electronics Forum | Wed Jan 26 08:23:51 EST 2005 | davef
Look here: http://www.pcbexpress.com/stencils/stencil_article_page1.htm
Electronics Forum | Mon Jun 03 15:10:48 EDT 2019 | emeto
Page 43 in the datasheet is giving you all detail how the stencil should look like...if this is what you need to do. Page 42-43 shows the geometry of the part and recommended land pattern for the PCB ...if this is what you need.
Electronics Forum | Mon Dec 08 19:13:35 EST 1997 | Aaron C. Wedemeyer
SMT Solder Paste Stencils can now be repaired for a savings of 30% - 70% off the high cost to replace. For savings examples, brief explanation of technologies and a free cost analysis, visit our page through the link below.
Electronics Forum | Mon Dec 08 19:13:05 EST 1997 | Aaron C. Wedemeyer
SMT Solder Paste Stencils can now be repaired for a savings of 30% - 70% of the high cost to replace. For savings examples, brief explanation of technologies and a free cost analysis, visit our page through the link below.
Electronics Forum | Sat Jan 24 07:59:53 EST 1998 | Dave Hamel
| SMT Solder Paste Stencils can now be repaired for a | savings of 30% - 70% of the high cost to replace. For | savings examples, brief explanation of technologies and | a free cost analysis, visit our page through the link | below.
Electronics Forum | Sun Mar 01 13:18:42 EST 1998 | Sam Sangani
Are you using Stencils to apply solder Paste for your surface mount PC board ? If so, please visit our web page http://www.pnconline.com/stencil.htm We make Laser Cut stencil with Re-Usable ACCUFRAME at lowest cost in the SMT industries. We also wil
Electronics Forum | Mon Jul 10 08:24:32 EDT 2006 | dougs
Hi Rob, Thats the thing, there seem to be no datasheets available, only catalogue pages on the distributers website. PBT is not listed on these pages. I'm thinking about takin g the other suggestion and running a couple of samples through the o
Electronics Forum | Thu Sep 16 21:46:16 EDT 2004 | jeremyt
I work for a major OEM as well, and we have close to 1000 stencils in house. We just recently went to a new way of labeling our stencils. We ordered metal ID tags out of McMaster, and assigned a Number to each stencil. We then attached each tag to t
Electronics Forum | Fri Feb 19 12:56:34 EST 1999 | Tony A
| Please could you suggest a recommended aperture sizes for | printing of smd adhesives. Any recommendations on stencil thickness as well as stencil finish will be appreciated. | Mark, talk to Irene Horvath at I Source Technical Services, Inc. Her