Electronics Forum | Thu Sep 08 13:14:11 EDT 2016 | claudea2
Hello, we have an Ekra E4 that we bought used and the stencil wipe never worked. We found that the air tubing for the up (black)& down (blue) of the wipe roll is missing. There are 2 push connectors for up and 2 for down to receive the tubes. Does an
Electronics Forum | Wed Mar 27 16:54:47 EST 2002 | davef
STARTING RANGES * Pressure � 1 pound/inch of blade (metal); 1.6-3 pound/inch (plastic) * Speed - 0.5 to 3 inch per sec [for standard pitch]; 0.5 to 1 inch per sec [for fine pitch] Your paste supplier�s recommendation is a good place to start. * Sepa
Electronics Forum | Thu Apr 22 12:54:28 EDT 2004 | Chris Lampron
Hi Indy, Loctite has a product called 7360 for cleaning uncured epoxies. We had a similar problem and then found out that the alcohol actually caused the epoxy to start setting making it impossible to clean. We now spray with 7360, wipe off with dry
Electronics Forum | Thu Nov 10 10:03:51 EST 2005 | C
Wow! that's amazing!, so you spray both sides, you wait for 2 minutes, and then you wipe everyting clean, and you do all this in 2 minutes, fantastic!
Electronics Forum | Fri Dec 06 13:00:29 EST 2002 | daanterstegge
I wouldn't recommend a metal squeegee, because if you can't wipe the step-etched area completely clean (that's the problem with metal) you'll have problems with the definition of the fine-pitch (it may stick in the holes). Best is a 70 Shore polyuret
Electronics Forum | Wed Aug 25 17:09:53 EDT 1999 | Earl Moon
| | Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Co
Electronics Forum | Wed Aug 25 15:51:58 EDT 1999 | JohnW
| Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products. Cons
Electronics Forum | Thu Aug 26 04:35:54 EDT 1999 | Wolfgang Busko
| | | Does anyone have any information on stencil aperture/pad ratios for noclean solder paste. In the past I have experienced severe solder ball problems when using the same size apertures from aqueous products as I do with the No-clean products.
Electronics Forum | Fri May 14 12:44:26 EDT 2010 | padawanlinuxero
Hi Since we are a small company with a small smt line, we did not have problems with our stencils because they are small and could clean them with Alcohol and wipes, but now we are growing, and now I am having a 20X20 stencils frames to deal with,
Electronics Forum | Thu Sep 15 10:43:18 EDT 2016 | claudea2
Thanks to Bobpan we re connected our wipe system and all the air actuators work fine. I still have a problem with the cleaner fluid dispenser. It is not moving as it should to dispense the liquid when we do the command. I suspect the values in the c