Electronics Forum | Thu Mar 29 20:39:01 EST 2001 | huat
Hi, Now, I'm working on depanalising equipment. The operating concept of this equipment is punch on the board for depanalising panel boards using Die-set. Now, I'm trying to determince the punch force using some formula, which I can't fin
Electronics Forum | Tue Aug 17 03:03:56 EDT 2004 | soease
thank you Grant and dreamsniper for these shared experiences; I think I'll still try some vapor phase just to have a look to this process, but will focus on a convection as long as it's the actually chosen technology in the company and that it's expe
Electronics Forum | Fri Jul 11 00:31:31 EDT 2003 | swuicsup
Marcel, Reconfiguring your machine from 80 to 20 stations is quite easy. In the sequencer portion of your machine, it has it's own I/O box. in it, there's the MIT card, location (1). The bit switches are there to inform the controller in the in
Electronics Forum | Thu Apr 12 09:54:46 EDT 2018 | randywoods
I have tried the key switch. When I shut down. From operator running production for the day. Normally you can us key switch. To open hood. I looked in service mode in PC to see if there was a option. To enable?
Electronics Forum | Thu May 13 11:25:02 EDT 2021 | rsikora
Thanks for the replies. MCS is not on our 3030, it probably wasn't available on the 3030 model. The ethernet switch which connects the vision pc and the rtpc was found to be defective. The switch was replaced and the 3030 returned to normal operat
Electronics Forum | Wed Jan 24 10:20:39 EST 2007 | electronhose
Seriously, OSP?, change the board finish, you are the OEM, correct? You have the power! Also, as another poster mentioned, high force applied at ICT ( possibily to cut through the OSP goop ?!? ) could be warping the board enough to crack the joints.
Electronics Forum | Wed Nov 02 13:24:09 EST 2005 | valuems
Hello Sorry we have not answered sooner, been gone. There is a height adjustment on the wiper. You will find a round nob under it, that is a height adjustment. I expect the wiper is not going all of the way up. And you can also control the speed
Electronics Forum | Tue Oct 14 09:17:09 EDT 2014 | rgduval
You could check the data sheets/web sites from the manufacturers of the press-fit parts. They typically will identify the recommended tooling/equipment necessary to install their components. Generally, pneumatic presses are suggested, with controll
Electronics Forum | Fri Jul 07 15:30:36 EDT 2006 | SMTCATC
One thing to take into consideration with EDC is their service. They have down sized their work force and I have had numerous problems trying to schedule or obtain service support. I have switched our EDC batch cleaner with Austin American Technologi
Electronics Forum | Fri Aug 23 02:29:16 EDT 2019 | sssamw
It seems because the soldering area is not enough, so the wetting force is small to hold the switch, remember >0.08g/mm2 for each part as in IPC standard. So, anyway, you need increase the soldering area to reduce weight/area number to below 0.08g