Electronics Forum | Wed Feb 02 20:14:56 EST 2022 | dwl
Make sure your pick up and Placement theta are correct. SOT-23 are notorious for having bad theta data in part libraries. I had an old placement machine that would center the part with an upward camera, looking at the feet. If I had the wrong pick t
Electronics Forum | Thu Jan 04 22:40:08 EST 2024 | erikfriesen
Does anyone know what the meaning of the Fixed vision options here https://file.yizimg.com/397047/2014010615545616.pdf showing two checkboxes, one 32mm, the other 17mm? The issue at hand is that fixed camera(upward facing) resolution really to low t
Electronics Forum | Mon Jan 26 09:44:13 EST 2004 | Dave Chapman
Dave , I am working with a West coast Liquidator, Which has a very good condition Amistar 1998 MT 5530LQ S/N 13908-87162 , Machine has 50 feeders 80 percent are 8mm balance are 12,&16's Has lazer centering , fiducial camera, and upward looking
Electronics Forum | Mon Nov 16 05:55:29 EST 2015 | bobpan
Hello, Average correction should be used. If the nut on the z-rod is what you are seeing through the parts leads...you can use a smaller o-ring and slide it up to where the nut is to block it out. You may have to try a few sizes and/or even double ov
Electronics Forum | Thu Jan 12 14:08:53 EST 2006 | jax
A few things that will determine the speed. Camera Questions: Will the parts use the "On-The-Head" or "Upward-Looking" camera's? If "Upward-Looking", will it be Standard or Digital? Feeder Questions: Will you use pnuematic, low-cost electric, or pr
Electronics Forum | Wed Aug 23 09:25:32 EDT 2006 | SWAG
I just installed a new CCD in a 4.0 mil upward looking camera - GSM. It's working well but is slightly out of focus. Do I adjust focus by moving the lense in and out of the camera mount or do I use the ring that is actually part of the camera that
Electronics Forum | Fri Dec 05 14:45:39 EST 2008 | wrongway
I have an 1 year old advantis with flexjet 3 head I tried using the on the head cameras with little luck using the upward looking cameras and putting the part defanition as a QFP using gull-wing leads mesuring the part as is seem to work best thats w
Electronics Forum | Thu Jan 12 16:16:33 EST 2006 | PWH
Thanks JAX and Cmiller. I have spec'd "on the head" optics 2.6 mpp. No upward cameras but might "wire" it for magellan digital for future add-on. Will be buying/using prec. pro. feeders but might have to use some old GSM pneumatics from time to ti
Electronics Forum | Wed Apr 11 14:57:31 EDT 2007 | itwasbill
Hi all! We are placing BGA's using a QSV-1 pck and place machine. I believe our profile has the correct information but we continue to get vision results not available when we inspect the part. Our screen appears as follows: NO RESULTS AVAILABLE PAR
Electronics Forum | Sun Oct 11 21:19:51 EDT 2009 | fulldrawmike
we have both flexjet and flexhead, we also have the new inline 7 head on some genesis dual beams we just put into operation. If you have a choice in flexjet heads take the inline 7. The flexjet 09 head is very labor intensive, stay away from them, e
