Electronics Forum | Tue Apr 21 12:48:13 EDT 2009 | bk
ok you verified that the motor was bad. So now i would go back and verify that your voltages are still good on the back of the computer box and on the booster board. If they all check out fine. I would take the mot x board from your working machine a
Electronics Forum | Tue Jul 19 09:45:51 EDT 2005 | cyber_wolf
I have seen this problem on Mydata machines before. I am very sure that your missing paste is being caused by the placement machine. Check these things : 1. There is a small white check valve on the pressure side of the vacuum pump. Make sure it is
Electronics Forum | Wed Mar 25 14:55:17 EDT 2009 | cyber_wolf
The small x motor quit working.It seems that there is no voltage going to the motor. Here is what I have done so far: *Verified that the motor is good. *Check pico fuses on the backplane *Verify voltages on backplane and on big booster. *Swap mot ca
Electronics Forum | Mon Apr 20 08:32:28 EDT 2009 | cyber_wolf
I actually did replace the cable from the comp box to the X-boards. The original small x-motor was indeed bad. I verified this by taking it to my working machine and trying to pulse it when it was in my hand. (the mot boards were loaded). Then I to
Electronics Forum | Wed Nov 24 02:53:50 EST 2010 | fönsi
Hello Our company has the opportunity to built a new smt line. we have looked several pick and place manufacturers and their machines. In the end, it will be the decision between two Samsung Modules (SM421) or two different MyData Modules (MY100SX a
Electronics Forum | Thu Mar 26 08:51:40 EDT 2009 | avalancher
Hi Sr. First suggestion is to call Mydata's phone support. With that said... Here is some ideas of what you could check: 1. Do you have power at the XWB board connector going to the motor (xxwm connector)? 2. Do you have power coming through the bl
Electronics Forum | Thu Jul 13 06:39:08 EDT 2006 | CL
Is it possible that the PCB is moving? First try an autoscan of the fids and then immediately perform a manual trim which will bring the camera over to where it found the fid. If it is on, there is an offset drift in your axis or the PCB is able to m
Electronics Forum | Wed Oct 01 16:53:05 EDT 2003 | johnpatricelli
We use Mydata PNP equipment, and are quite happy with it's speed and accuracy, especially with the latest version of the Mydata Tpsys software which includes a prototype version of their emergent auto-teach function for package sizes that can handle
Electronics Forum | Tue Jan 15 17:06:04 EST 2002 | pjc
The Mydata machine's Y-axis moving does not affect parts already placed on the board. The machine has very sophisticated acceleration and deceleration to account for this. There are many users of Mydata machines running 0.3mm pitch and large heavy pa
Electronics Forum | Tue Jul 19 05:16:34 EDT 2005 | aj
Hi, I looked at the pictures and it looks as if it should be a straight forward solution..but obviously not. I would focus on the stencil/print more than placement machine. The placement machine simply places the part on the board!#(just one thing
