Electronics Forum | Fri Dec 03 08:06:23 EST 1999 | Mark Anderson
Firstly, Verify your Z-height per the procedure in the Maintenance manual. In general, release the placement stopper and rotate cam onto flat surface of board with z-axis at zero. There should be 0.15 mm compression of the spring
Electronics Forum | Wed Mar 02 10:49:45 EST 2005 | Dave Erbst
Try checking your Z height and also make sure that they are cleaned regularly. If the Z height is off your will be pressing your nozzles into the holders thereby causing them to bind up inside the holder. Replace the springs periodically since they d
Electronics Forum | Tue Sep 26 10:44:28 EDT 2006 | Brad Courtemanche
Hi larry, don't know if you resolved your problem but if machine is picking part three times, rejecting all three but places number fourth your nozzle pickup is misaligned very slightly. During the first three pickups the nozzle is finally seating it
Electronics Forum | Mon Sep 05 11:51:30 EDT 2022 | jojoled
Can anybody help with Re-calibrating the Z-axis height in MS parameter , on JUKI KE760L? In MS parameter manual, there is information that these accessories are needed to recalibrate the Z-axis , can anybody tell where to get them, or ideally how to
Electronics Forum | Wed Aug 18 06:28:55 EDT 2004 | M.Enright
We have Z height adjustment on a turret chipshooter to compensate for various thickness. At the moment all the 1206 Cap are treated the same.It's something we are going to change over the next few weeks. Thanks for your help!.
Electronics Forum | Wed Sep 07 10:42:28 EDT 2005 | Rob
or the biggest issue from my days with the worlds largest Chip cap producer..... Incorrect part data or adjustment on a chipshooter (z height).
Electronics Forum | Wed Mar 31 11:33:19 EDT 2010 | gantry228
Also, ensure you have taught the pickup and have the part on the nozzle when teaching the placement Z height.
Electronics Forum | Wed Jun 11 10:33:06 EDT 2014 | demzvill
Do you mean that pick up z height is taught too deep thats why it can possibly flip the next chip. I will check our machine if have the same setting as yours. Thank you for this thought.
Electronics Forum | Tue May 28 02:09:47 EDT 2019 | robl
Back in the day when everyone had turret chipshooters we used to see a lot of cracking due to incorrect z heights, especially where customers swapped between manufacturers.
Electronics Forum | Fri Jul 22 12:56:42 EDT 2022 | proceng1
I see now that you sent me 4 emails. They got kicked to SPAM, so sorry about that. I'm glad you figured out the z-height. If you have another issues, let me know. I know these machines pretty well.
