Electronics Forum | Fri Jan 07 09:23:16 EST 2011 | ercdave1
I removed the front cover of the controller box and found a cable secured to the right plate with cable ties but no floppy. the cable has a 50 pin connector. maybe is an option on your machine that my didnt get. I hope tom has better luck. I am goin
Electronics Forum | Tue Feb 08 10:25:46 EST 2011 | remullis
Michelle, It's been years since I worked on these machines and mine were CS400E's. The next time this error comes up instead of powering down Unplug the RS232 cable that links between the PC and the processor board in the machine, I cant remember if
Electronics Forum | Thu Jun 30 14:25:42 EDT 2011 | bobpan
x and y ribbon cables would be my first guess...... good luck
Electronics Forum | Sun Sep 25 16:45:38 EDT 2011 | cbroegger
Have seen this with bad/intermittent connections to the camera. Replacing the cable fixed this.
Electronics Forum | Wed Jan 30 15:21:56 EST 2013 | leemeyer
So that would be Larry the Cable Guy? Hmmm
Electronics Forum | Sun Aug 25 16:32:33 EDT 2013 | dekhead
Damaged video cable (shielding) betw camera and cognex most likely.
Electronics Forum | Fri Jan 10 15:33:57 EST 2014 | hans88
Hello Rob, Thanks for your fast reply. I will check the parts you mentioned. You were right about the mot card we swaped it with a new one but that made no difference. Today we tried to find were the problem could be we: - removed the j1, j2 and
Electronics Forum | Tue Dec 02 06:30:09 EST 2014 | dph150
Found the problem... The cable pin out needed to be changed at the PC.
Electronics Forum | Wed Aug 31 17:39:44 EDT 2016 | dekhead
2 on SMEMA end of cable) does it indicate downline available?
Electronics Forum | Thu Apr 18 22:43:41 EDT 2019 | jackwong1931
I agree with you
