Electronics Forum: stencil (Page 126 of 541)

Can UP 2000 printer work with R and L justified stencils?

Electronics Forum | Mon Jul 31 21:14:30 EDT 2006 | chrisgriffin

Does any one know how far left or right from center the aperatures can be? If I had a 6" board, and a stencil with cut-outs for both sides right and left of center, would I have problems?

Ekra Stencil Printer

Electronics Forum | Thu Aug 03 09:09:15 EDT 2006 | Rush Fan

Can anyone comment on the pro's and con's of Ekra's E5-36 stencil printer? Has there been an industry review written for this particular model?

Stencil Cleaner

Electronics Forum | Mon Aug 14 13:44:55 EDT 2006 | carln

The Systronic machine uses spray technology. I recommend that you read the following thread regarding the potential damage caused by spray stencil cleaners. http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=10557&#Mess

Always a new treat with new clients

Electronics Forum | Tue Oct 03 15:22:43 EDT 2006 | Mark M.

I agree with Steve on this. If you just order the stencil you would probably save more money than have to fix the boards if you were to do it manually. Most stencil houses for new accounts will let you get a free sample screen as an evaluation.

Always a new treat with new clients

Electronics Forum | Tue Oct 03 16:05:23 EDT 2006 | stepheniii

I've cut component patterns out of old stencils. Not as good as buying a new mini stencil but still it worked. I guess you can't buy those pre-pasted boards? I've never tried them but they look interesting.

Solder beads on small caps and res.

Electronics Forum | Wed Nov 29 17:05:15 EST 2006 | slthomas

I have used a 10% area reduction with home plates on 6 mil stencils with good success. If you're using 5 mil stencils you might go with 0 or 5% reduction.

Stencil Cleaning

Electronics Forum | Thu Jan 04 10:28:22 EST 2007 | samir

Here is a great thread on the various stencil cleaning technologies available: http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=3026&#Message12325

Pump Stencil

Electronics Forum | Mon Jan 22 12:55:53 EST 2007 | russ

Volume req'd for pih is 2.2 x the hole volume after lead has been inserted. Stencils work quite well in PIH applications too if you can make aperture large enough. Slow squeegee speeds also aid in filling hole with paste. Russ

Stencil Fiducials

Electronics Forum | Thu Feb 15 13:13:51 EST 2007 | SRM

Your DEK could read non-blackened fids? Wow, you must have bought them from Superman. Or did you just teach baord pads and stencil openings?

Stencil Fiducials

Electronics Forum | Thu Feb 15 13:18:16 EST 2007 | slthomas

The E5s I had just needed the fids to be burned black. Never needed epoxy, although we did have one stencil that we had to touch up with a sharpie now and then because they didn't burn it dark enough (too hot...?).

stencil searches for Companies, Equipment, Machines, Suppliers & Information