Electronics Forum | Fri May 06 08:27:38 EDT 2016 | kahrpr
We have Samsung and havehad no problems with simultaneous pick ups with 201s 0r 402s. the feeders are durable and do not need much repair especially the sm feeders. The SME feeders have not been out as long so we will see so far so good. As with all
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Electronics Forum | Fri Apr 23 22:42:13 EDT 2004 | ethercom
Thanks for the input Pete. I am using CP4 8x2 feeders. I have tried first with 0.7mm nozzle. Although pick up was OK, the camera saw a pregnant 0402 part which is as you know is 1mm by 0.5mm. I then moved to specially made 0.6mm nozzle to minimise th
Electronics Forum | Tue Mar 13 12:15:14 EST 2001 | onset
We have a 4C and it places 0402 components without any problems. The tricky part is getting the machine to pick them up out of the feeder it takes patience but you will get it. jake p.s. you
Electronics Forum | Tue Mar 13 12:33:35 EST 2001 | Simply Anonymous
Try calling Quad, I know that they were in development of a feeder designed specifically for 0402. The problem has always been the pick of such a small part, but the placement is very reliable. By way, have you heard that Quad is being purchased by
Electronics Forum | Wed Apr 28 17:41:44 EDT 2004 | longpham246
Hello! We placed quite a few of 0402 with our CP3 using 0.7mm nozzle with the same feeder as you had. Pick up can be adjust and calibrated, but that is not the problem, I agreed with you on that part. The trick is you have adjust and play around wi
Electronics Forum | Mon Oct 09 13:36:30 EDT 2006 | ppminc
Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made
Electronics Forum | Tue Mar 04 17:17:29 EST 2014 | catsem23
Hi I'm trying to pick and place a lot of sod523 components with a mydata my12. I'm using C14 standard tool and Hydra tool H01. For some reason no matter what I try to do when the head picks the component with the C14 tool the machine emergency stops
Electronics Forum | Mon Oct 17 13:58:09 EDT 2022 | cyber_wolf
I would say not very reliable. The component separator spring, pick point adjustment, and magazine have to be perfect. Your nozzles have to be perfect etc..etc... My general advice is move to a different platform if possible. I have worked extensive
Electronics Forum | Tue Sep 19 20:23:09 EDT 2000 | Arturo
99.70% mounting rates. 4.Make sure your machine can handle the recognition of this components (shape & height) usually height measuring(pick up error) is the biggest problem with resistors. 5.When mounting a real PCB you can have spacings up to 0.3mm
