Electronics Forum | Mon Feb 20 04:59:40 EST 2006 | Loco
For visual inspection table 1-2 seems to be in order here. If you can not see the bottom using 1.8 and table 1-2, it clearly would be a defect and rework would be the only option Well, my thoughts anyway, wonder if someone has other thoughts on thi
Electronics Forum | Thu Oct 22 03:10:49 EDT 2015 | myleb
I already check that sir, maybe its a loose > connection or board problem. maybe the ssr board was damaged. try swap the ssr between the A and B stage. Open the machine cover at AF/BF stage, it's the down left board with many connectors (have COV1
Electronics Forum | Wed Aug 18 21:04:45 EDT 2004 | davef
Sectioning equipment suppliers: Leco, Struers, Buehler General automatic and manual sectioning methods: IPC-TM-650 2.1.1 and 2.1.1.2
Electronics Forum | Mon Mar 24 10:38:33 EDT 2008 | davef
No standard, but common practice is: IPC-TM-650 Test Methods Manual * Method 2.1.1, Microsectioning, Manual Method * Method 2.1.1.2, Microsectioning, Semi or Automatic Technique
Electronics Forum | Mon Nov 11 17:16:11 EST 2002 | soupatech
Hi, I use the Fuji MCS-16F. The disks I have are labled.... MCS 2E System Disks #1 - #10 Version 3.38 MCS 2 Option Disks #1 - #2 V2.54 Automatic Programming 10 MCS 2 Option Disks #1 - #2 V2.49 HOST Communication 11 OS-9/6800 Level 1 System Di
Electronics Forum | Fri Apr 02 12:41:12 EDT 2010 | CL
Nicolas, 4.1.2.1 and 4.1.2.2 mention the requirements for drying an MSD to resett the clock life. 4.1.2.2 states that once a component is dried, refer to 5.3 for safe storage. Under that specification is 5.3.3.2 DRY Cabinet at 5% RH- This states tha
Electronics Forum | Mon May 07 11:09:49 EDT 2007 | davef
4 Fluxer Operation 4.1 Set-Up and Check-Out the Fluxer 4.1.1 Spray Fluxer Set-Up and Check-Out 4.1.1.1 Pass a sample unsoldered board through the machine. 4.1.1.2 Remove the board just after passing through the fluxer and the air knife. 4.1.1.3
Electronics Forum | Thu Oct 05 07:43:22 EDT 2000 | Leon
Anyone know where I might find info on class 1 class 2 and class 3 solder joints.
Electronics Forum | Tue Jul 02 10:57:29 EDT 2019 | BigFuji642
Are the pinouts for the cable mirrored (like normal Male to Female DB pinouts)? Like the Male pins when looking straight at them are 1 2 3 4 5 and the female when looking straight at it is 5 4 3 2 1 Or is it that they are not mirrored and both ar
Electronics Forum | Thu Jan 04 12:51:37 EST 2007 | Board House
Hi Chunks, Starting copper on outer layer with .0007 is 1/2 oz. copper foil. so if starting copper is .0007 and your Board house will plate an additional .0021 mils of copper. which will give you a finished copper weight of .0028 Mils or (2 oz.) Y