Electronics Forum | Mon Jan 14 08:56:30 EST 2008 | geb
Hi, The machine is a Universal GSM1 flexhead. Is it possible to just change the lens of a 2.6mil camera for a 1mil or 0.5mil lens. Or do I have to buy a complete camera assembly to do this? Thanks, Grant
Electronics Forum | Fri Sep 17 15:51:07 EDT 1999 | JohnW
| | | I am not familiar with the "mil" metric. How many inches is in 1 mil? | | | | | | ...or 10 mil? | | | | | | | | 1 mil= .001 inches | | 10 mil= .010 inches | | Also, it has nothing to do with metric. | | | I was also confused with this sta
Electronics Forum | Fri Jul 31 17:21:38 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Fri Jul 31 17:23:11 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Fri Jul 31 17:24:12 EDT 1998 | MMurphy
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Wed Aug 05 07:44:18 EDT 1998 | Joe Vella Ottosen
31 mil pitch components go either 1:1 or reduce 1 mil per side (you can reduce further if the foil thickness is > 7 mil.), you may want to try an oval shape here also.
Electronics Forum | Thu Apr 29 01:49:10 EDT 1999 | Daniel J.M. Guibord
Can anyone in this world produce such small PCB/PWB trace widths? Lots of theory so far, but have not found anyone yet who can do it in practice.
Electronics Forum | Thu Apr 29 09:37:12 EDT 1999 | Dave F
| Can anyone in this world produce such small PCB/PWB trace widths? Lots of theory so far, but have not found anyone yet who can do it in practice. | Daniel: 2 mil lines with 3 mil spaces are pretty technical. Good luck. Dave F
Electronics Forum | Thu Jan 09 18:46:04 EST 2003 | ReworkMAN
The DRS systems are far superior. They don't compete with ERSA or Metcal. The nozzle technology, heaters, and software are so much better. I would find a used DRS22C and use it before those other systems. The vision system in the DRS22 is great
Electronics Forum | Thu Mar 27 11:49:18 EST 2003 | kenlchin
In printing,the thickness of solder paste perpendicular to the Squegge direction is always lower 1 mil than that parallel to the Squegge direction,so Insufficient Solder may occur.I think you may slow printing speed or widen appertures to resolve it.
