Electronics Forum | Fri Sep 27 10:01:25 EDT 2002 | stefwitt
chips up to 1411 ( I have not seen a 1411 component yet, but 1210 is a good number ) in 8 mm, IC up to SO8 in 12 mm, IC up to SOL 20 fit in 16mm tape. This is just a basic rule. You may also find SO 20 in 24 mm tape. More important is the reel width,
Electronics Forum | Thu Jun 29 02:16:07 EDT 2006 | AR
We are experiencing some difficulties with reflow soldering a 1210-sized MOV with silver/palladium finish. The PCB finish is SAC. When inspecting the board after reflow it seems that nearly all solder is gone both from the pads and the component term
Electronics Forum | Wed Oct 29 14:38:19 EDT 2008 | markhoch
Actually 0603 is 8mm x 4mm pitch. 0201 and 0402 are 8mm x 2mm pitch. 0603, 0805, 1206, 1210 are 8mm x 4mm pitch. Tant Caps 3216 & 3528 packages are 8mm X 4mm pitch. 6032 and 7343 are 12mm X 8mm pitch. ICs, Diodes, Transistors are various sizes and d
Electronics Forum | Thu Apr 07 11:39:48 EDT 2011 | remullis
My oven profile is 155,160,165,180,220,245,255,227 Cooling Zone 132/92. This is a 8 zone CV820 Technical Devices oven. My assy profile using Datapaq Q18 - Base on one probe feedback - Positive slope (7.09), Pos Slope Time (.45), Rise Time (1.17), Me
Electronics Forum | Fri May 04 12:19:53 EDT 2012 | gnus
I'm guessing you're running small batches of boards on the MyDatas. We had the same issue with management when they decided to save on parts (not realizing it cost them more in time and more frustration for us). We had Agilis feeders so that helped.
Electronics Forum | Wed Mar 15 04:36:16 EDT 2017 | Rob
@ Sr.Tech, Any voiding means that the part of the package under the void is not forming a solid thermal interface with the PCB, therefore it's heatsinking capability is reduced. With the drive for smaller packages with higher power handling capabil
Electronics Forum | Tue Jan 29 08:21:50 EST 2019 | electronics101
Hi All, Can someone please help, I have a number of tall surface mount components that according to IPC 610 (8.2.2.3) are a fail due to the end termination not wetting at least 0.5mm + solder height. The components are very well soldered but the sol
Electronics Forum | Wed Nov 08 11:48:09 EST 2000 | Chris May
Gary, Here goes for what it is worth. We store all of our SM reels in the SM area in proper trolleys (Mossmann-Tebbs types). They are stored by part number, which sets them into Capacitors by value and size. Resistors the same and so on with induc
Electronics Forum | Tue Feb 16 16:28:30 EST 1999 | Tuffty
| | Can anyone help me with the pros and cons of trying to wave | | solder tantalum and large (1812) ceramic capacitors. I do | | know that one may see fractures on larger cermaic caps, but have not seen much on the tantalums. Any insight as to what
Electronics Forum | Fri Oct 03 09:00:18 EDT 2003 | davef
EIA standard packages have a variety of L/W proportions. EIA||Dimension mm (LXW)||Proportion (L/W) 0201||0.6X0.3||2 0202||0.5X0.5||1 0303||0.8X0.8||1 0402||1.0X0.5||2 0504||1.25X1.0||1.25 ||1.4X1.4||1 0603||1.6X0.8||2 0805||2.0X1.25||1.6 1111||2.8X2