Electronics Forum | Wed Sep 12 20:53:08 EDT 2001 | davef
Sorry no practical experience, but I've looked at these machines and hold them in high regard. As long as you have lots of feeders you'll be fine in a quick turn shop. They're fast, have a great range of component type placement capability, fairly
Electronics Forum | Thu Sep 29 13:39:08 EDT 2005 | PWH
Universal GSM1/2 go W18.000� x L20.000� depending on configuration. I have done boards as much as 22" long with some creativity. GSM1 runs about 4500 pph (approx. 2500 pph realistic) and GSM2 9000 pph (approx. 4000-5000 pph realistic). Cost used fo
Electronics Forum | Thu Dec 29 09:32:30 EST 2005 | pfifla1
I need the bug for the machine, if you could send > me over the measurement i would try to get it > made. would your owner consider releasing it if i > gave him funds to secure its return and then paid > him for the time i used it. dan please s
Electronics Forum | Thu Dec 29 10:54:29 EST 2005 | DannyJ
Hi PFI, Sorry, the owner probably will not go for shipping the bug. We have 4 plates here, but only one bug for the dip and one for the VCD's. I'll do my best to get you the information needed, though... The part # is DIP-561 and is $500 USD fro
Electronics Forum | Thu Dec 29 11:28:14 EST 2005 | DannyJ
Measurements: Block is .680" x .680" x .125" 4 dowel pins: .026" diameter x .250" length Center to center measurements on block where dowel pins are inserted: .600" x .600" Let me know if I can be of any more assistance. Dan
Electronics Forum | Wed Aug 23 02:48:11 EDT 2006 | ec
Hi, Appreciate someone could advise or forward a format to me how to work out number of pallet needed for wave-solder if the machine speed is at 1.0m/min, volume per month is 4500 sets, pallet length 0.3 meter, conveyor length 5 meter...... Looking
Electronics Forum | Wed Dec 06 22:56:50 EST 2000 | Brad Kendall
Steve, Metcal can still provide some of these nozzles. I represent Metcal in Michigan and have a few customers still using the FCR system. They have purchased some new nozzles, but I also have an old demo unit with a large assortment of demo nozzle
Electronics Forum | Wed Dec 06 22:57:23 EST 2000 | Brad Kendall
Steve, Metcal can still provide some of these nozzles. I represent Metcal in Michigan and have a few customers still using the FCR system. They have purchased some new nozzles, but I also have an old demo unit with a large assortment of demo nozzle
Electronics Forum | Thu Apr 06 02:23:50 EDT 2000 | Marcus
What about your printer and your stencil ? Do you have a problem with misalignment between pcb and stencil ? How often do you clean your stencil during production ? Maybe you have smearing under the stencil because there is a snapoff between stencil
Electronics Forum | Wed Jan 19 17:01:18 EST 2000 | Chad Notebaert
You can buy desicant packs and indicator cards to place back in the original or a new bag with the BGA's and re-seal using a heat sealer (Vac Seal being the best). If properly done the material will be kept below the 20% RH level. Another option woul