Electronics Forum | Mon Jun 11 16:51:32 EDT 2012 | fredc
If the orings are the same as Quad they are .158 ID and .024 thick. These dimensions are in inches. The thread for the Samsung QSA30 is 5.0 X 0.8mm, this may be the same for the CP40. If this is the correct oring size is it special and relatively ha
Electronics Forum | Fri Apr 06 19:06:38 EDT 2007 | davef
There is no standard for what you're trying to accomplish. We recall a similar thread on SMTnet. In it, a poster suggested: "Call them: 1206T.5, 1206T1.0, SOIC16, RESNET16, SOIC16T5.0, ALCAP4, ALCAP5 etc., where: T means thickness but for the ALCAP
Electronics Forum | Thu Mar 23 00:37:47 EST 2000 | Donnie DeYoung
Thanks guys. We are currently using an Opti Flux fixed spray head at 10 to 20 psi. We were using the 351 flux at 60 psi before this, so as you can see we found that there's a huge difference here. We are currently running a conveyor speed at 5.0 FPM.
Electronics Forum | Thu Aug 09 15:25:52 EDT 2001 | neil
Your right Dave. The system is set up correctly but sometimes there is a problem deleting messages with attachments. This problem was exacerbated by the scam32 virus. We set up Norton AntiVirus to quarantine these attachments and when you try to dele
Electronics Forum | Tue May 28 17:50:20 EDT 2002 | myu
Hi, Everybody! I'm looking for a High-Temperature Solder Paste / wire: "Pb93WROL140.71454";or "00Z890"; J-STD-006 Solder Alloys Sn05Pb93Ag02B Sn% Pb% Ag% Solid C Liq C Solid F Liq F 5.0 92.5 2.5 280 284 536 543 It should meet IPC/J-ST
Electronics Forum | Fri Dec 01 06:31:53 EST 2006 | CHITRA K
We use SMBJ5.0A - D0214A package component in our products.During production recently we have identified a seroius problem. The problem is, After reflow soldering the impedance becomes more / lesser and due to which the product does not work since th
Electronics Forum | Wed Oct 18 09:45:23 EDT 2017 | alexeis
Hi, You have 2 options: 1. You can pay for a software solutions but it can't do 100% work. You will complete manually a conversion (between 5%-50% based on a complex of your board, type of component and other problems). 2. Do it by your self using E
Electronics Forum | Thu Nov 07 16:02:06 EST 2019 | kylehunter
OK, got a lot of information today doing some testing.. Version number:- 07 SP11 (985 B02) Released Dec 8 2006 I did the tool(less) calibration of the squeegee height, which worked fine, no error. Did a test print, as you can see from the image, t
Electronics Forum | Thu Jan 13 15:17:27 EST 2022 | goseese
Thank you very much I will look for something moving, loose or getting pinched when the table moves. -- Update -- checked every single connector, all the purple cables/connectors too. Everything it tight and not getting hung up. Checked all the
Electronics Forum | Sat Jul 29 00:44:30 EDT 2000 | Jason
Thanks for all the ideas. I tried solder "thieves" by placing some desoldering wick behind the briging pins and it worked! I have yet to try Chrys' idea but I will first thing Monday. This is a new board that has had this problem from day one. I