Electronics Forum: aging (Page 2 of 33)

Cover tape tearing

Electronics Forum | Thu Dec 15 19:49:23 EST 2005 | Liza

Hi GS, I forgot...coming from what you said about aging, the complaints we received come from products that were processed 3-6 months ago. Based on your experiment, should this age affect the quality of the seal? Thanks a lot, Liza

PCB Cleaning Challenges.

Electronics Forum | Mon Aug 03 01:49:03 EDT 2020 | kathleen123

Please try to use the steam aging tester and make a try ! When the water temp up to +100℃, Put your new model into the water tank. This +100℃ hot and steam water may remove the paste in via hole. Thank you. https://www.wewontech.com/steam-aging-

Solderability of a metal

Electronics Forum | Tue Mar 04 09:12:35 EST 2008 | davef

Q1. What would you recommend for the best practice or comparison? A1. We'd go with dip & look. It's easy and cheap, requires no advanced degrees in measurology. Have you reviewed "J-STD-002B - Solderability Tests for Component Leads, Terminations, Lu

SMT voiding

Electronics Forum | Wed Oct 03 19:28:58 EDT 2012 | rgduval

Given that you're seeing it on nearly every part, we tend to lean towards Dave's explanation. We wouldn't expect outgassing from the pad to be an issue (at least, we've never heard of it before, which doesn't, necessarily, eliminate it as a potentia

Welcome

Electronics Forum | Mon Aug 25 20:31:58 EDT 2003 | davef

Handsome: Welcome. There is always room for another balding, fat, aging SMT smooth-talker here on SMTnet.

Chipmounter Placement Speed

Electronics Forum | Thu Sep 09 02:44:11 EDT 2004 | fastek

Peter- Tact time is not affected by the age of a machine. Placement accuracy and throughput..yes....but not the speed.

Steam Aging of ENIG

Electronics Forum | Wed Dec 15 21:29:34 EST 2004 | davef

We�d say that it�s incorrect that ENIG solderability protection cannot be steam aged. It�s true the immersion tin and silver cannot be steam aged. We believe that most of the issues surrounding the poor performance of ENIG after steam aging is attr

SAC305 Solder Balling

Electronics Forum | Thu Aug 17 17:21:27 EDT 2006 | slthomas

Not so much when I suspect it's a function of age. ;)

Aegis Circuitcam 7.0 Manual and Mydata.mdb

Electronics Forum | Tue Apr 23 14:46:36 EDT 2019 | robstevenson

Thank you very much i have been searching for this manual for ages.

smd capacitors- ICT measuring

Electronics Forum | Thu Jun 13 08:32:24 EDT 2013 | rway

Have you verified the measurements on the bench with an LCR meter? Chances are you are experiencing aging with these ceramic caps. We have similar issues with X5R and X7R caps. You will see the effects of aging with returns from the field as well


aging searches for Companies, Equipment, Machines, Suppliers & Information