Electronics Forum | Tue Oct 13 08:49:09 EDT 2009 | kudamarani08
try "halt" your EMI and check if the @ appear on screan. If yes, type G or P to re-start the system. If NO, make sure 5VDC is present. V2 controller really a tricky one.
Electronics Forum | Tue Oct 13 19:15:59 EDT 2009 | fulldrawmike
if you have not turned the halt switch down then back up you can sometimes get a restart using 0(zero)G and enter. If that does not work you will have to load the exec.
Electronics Forum | Sat Aug 03 10:39:38 EDT 2013 | jaimebc
Which model of Manncorp are you looking in to, we recently purchased from Manncorp and I can tell you from our experience what to expect.
Electronics Forum | Tue Aug 06 14:56:48 EDT 2013 | garyck
Thank you very much, just the type of information I have been looking for. Gary.
Electronics Forum | Wed Aug 07 11:07:14 EDT 2013 | garyck
On last question. Is it possible to feed loose resistors into the machine one at a time?. We use a lot of parts where yearly usage is less than 1000 per year. Gary.
Electronics Forum | Wed Aug 07 12:27:48 EDT 2013 | jaimebc
It is possible. You can do one or up to 5 at a time. But yes you can feed loose resistors. We do it as well.
Electronics Forum | Sat Oct 03 01:44:56 EDT 2009 | slthomas
Doug is on to something there, but you may still have other problems. It could be your exec. is corrupt and needs a reload (I sound like a certain UIC tech. support dude) or you could have a hardware problem. Do you vacuum that thing out with any f
Electronics Forum | Mon Aug 05 22:10:38 EDT 2013 | jaimebc
We have HRFT-301U ( staple bend) is fairly easy to set up. All you need is t-handle Allen that I believe is provided with the machine. All adjustments to form a part, both pitch and lead length are mechanically adjusted by sliding the forming and c
Electronics Forum | Mon Aug 08 07:12:07 EDT 2005 | pci
yes there are. main mfrs of axial inserters are panasonic,samsung,tdk,universal.... in some of the cases u need to have a axial sequencer too, which are used to sequence the axial componnets prior to the insertion.
Electronics Forum | Mon Aug 08 01:08:30 EDT 2005 | Miked
We use in our production a lot of axial components so we dont have any smd components or pcb`s. Now i would like to know is there in a world any axial component shooting machines?
