Electronics Forum | Tue Mar 06 14:27:14 EST 2018 | charliedci
Contact Dan Chretien at Southwest Automation Consultants. He has helped me with our old UIC axial inserter. He has a website.
Electronics Forum | Wed Jun 30 15:02:17 EDT 2004 | shk5678
Dear Michael Usually the equipment you need is: Universal Instruments 6772 Multi Mod IC Inserter. Universal Axial Inserter either a combination unit or 2 stand alone units one that sequences the parts and one that inserts them. Universal Instrume
Electronics Forum | Thu Jan 23 17:24:08 EST 2020 | rvines1
Due to couple of customers who still have some products that are completely through-hole, we use our Universal DIP and Axial equipment on a somewhat regular basis. Our machines are pretty old, but they work pretty well, and we don't do enough throug
Electronics Forum | Wed Feb 01 10:53:56 EST 2006 | edruppert
AMS, Are you aware that you will have to purchase several types of insertion equipment for different part types? You will need an axial inserter, radaial and DIP inserter to cover the gamut of thru-hole insertion. Even then you may not cover oddba
Electronics Forum | Wed Jan 21 15:10:30 EST 2015 | ahernand75
VCD equipment is a single-process sequencing and insertion of axial components and jumper wires. Cheers!
Electronics Forum | Mon Jan 06 11:05:54 EST 2003 | Randy Villeneuve
I am not sure what parts you are inserting, i.e. radial, axial. The first thing I would do is to make sure the design can be automated. There are design guidelines from Universal and others that are good in determining if the parts can be placed and
Electronics Forum | Thu Jan 23 18:34:15 EST 2020 | slthomas
It's hard to poka-yoke loading reels onto the machine (either a inserter-sequencer or a sequencer, then getting the sequenced reels properly indexed). The only way I know of to make sure they've been set up properly is with visual inspection of EVERY
Electronics Forum | Fri Jan 31 13:45:49 EST 2020 | slthomas
We had a custom bar code storage and feeder setup. Stores material handlers would bring the parts to the line, scan the part number on the kanban card (always accompanied the parts), and the storage location LED flashed so they knew where the place
Electronics Forum | Tue Jul 21 11:42:32 EDT 2020 | charliedci
I have been tasked with finding the equipment necessary to fully automate our TH assembly. Currently about 98% is performed manually on stuff lines with the other 2% using a 30 year old axial inserter. I am asking if anyone else has gone down this pa
Electronics Forum | Mon Jan 24 08:42:25 EST 2005 | SLVito
Morning All, I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine.