Electronics Forum | Sat Jan 23 05:21:09 EST 2016 | spectrumsmt
Hi Rick, we sell a very good after market recalibration jig which is available to calibrate most makes including Samsung. We also sell nozzles and feeders! Please get in touch or have a look at the website spectrumsmt.com All the best Ian
Electronics Forum | Tue Jun 20 10:46:08 EDT 2023 | dontfeedphils
Usually best to stick with older/tested OS for machines/software compatibility. Or setup a VM with Win7 or Win10 in your main machine to handle picky software suites.
Electronics Forum | Wed Mar 02 18:46:02 EST 2005 | Austinj
The tendancy always has been "when in doubt, touch it up"... this is not the way to "verify the process" and is not the best strategy for multiple reasons (unessecary rework, additional labor costs, as well as making the solder joint more brittle, [i
Electronics Forum | Mon Oct 15 11:03:24 EDT 2001 | mikecampbell
Dave, Thanks for the info! Yes, I have read the IBM document and realized that I was missinformed about the paste volume. I need 5000 to 5600 cubic mils of paste. Running the numbers I get a 32 mil aperture with a 7 mil step (the rest of the board
Electronics Forum | Fri Jul 15 10:34:28 EDT 2005 | dougs
how do you do it stephen? i'm interested to know what methods can be used to monitor a process such as this. is it best to set-up the wave machine parameters as russ and davef were talking about, what then, how do we know what effect a change in
Electronics Forum | Mon Dec 18 23:24:50 EST 2006 | grantp
Hi, Yes, I would hate to resort to cleaning, but the product must be clean. We have been using palettes to keep most of the flux off the PCB, but there is still residue around the connectors. Does anyone suggest a good no clean flux to use with le
Electronics Forum | Tue May 01 18:38:44 EDT 2001 | djarvis
Barry, We have two of the MV models, one that we bought second hand, and the other new. The " i S " means inline? We love the MV's, which are offline, semi-auto, vision aligned. Just a great machine. Simple, intuative software, all parameters easy to
Electronics Forum | Wed Mar 05 03:43:58 EST 2003 | testing
Hi, Mike Thanks for the reply With your oracle system were you able to perfom SPC analysis? and if possible do you have any Material that may be helpful for me to get my system setup i.e. whether through Excel, Access, Oracle etc. + What are your
Electronics Forum | Tue Mar 01 10:50:32 EST 2005 | pr
I think the 1st option would be the best. I have found that a touch up person WILL TOUCH UP SOMETHING, regardless of the electrical needs of the board. This leads to a lot of unnecessary rework of joints. I would hope QC is tracking the defects and t
Electronics Forum | Fri Mar 03 13:51:17 EST 2006 | Chunks
We've looked at our stencil under magnification after hand cleaning. There is some paste left behind. Machine washing removes all of the paste. Your best bet is to clean like normal, then look at the aps under magnification. Adjust accordingly (a