Electronics Forum | Mon Feb 12 08:37:04 EST 2018 | dontfeedphils
The piece that splits the vision probably has smudges or scratches on it. You're able to teach a set of pads. Before teaching the fid, hit the "Draw Correlation Box" button (I think that's what it's called, it's been a couple years). Then draw a b
Electronics Forum | Sat Oct 10 02:59:53 EDT 2015 | aemery
AVCOM, I have worked on a few of the Conceptronic ovens recently for one of my clients. They had a similar issue, all the heaters dropping out with a high temp circuit error which kicks out CON1 (Heater power). If you're saying what I think your sa
Electronics Forum | Thu Jul 13 21:12:41 EDT 2000 | Dason C
Hi! Larry, absolutely "NO". When you move the component out from the refridgerator, the moisture will condensed to the surface. The Eureka Dry Box is different, it use special desicannt in the drying module to absorb the moisture inside the box and
Electronics Forum | Thu Jul 13 21:12:41 EDT 2000 | Dason C
Hi! Larry, absolutely "NO". When you move the component out from the refridgerator, the moisture will condensed to the surface. The Eureka Dry Box is different, it use special desicannt in the drying module to absorb the moisture inside the box and
Electronics Forum | Fri Sep 25 11:07:45 EDT 1998 | Chris Fontaine
We use dry boxes manufactured by DMS Clean Room Products in Lawrence, MA. The phone number on the tag is (508)683-2325, but I think their area code changed to either 978 or 781 recently. We flow dry nitrogen through the box in order to ensure that
Electronics Forum | Fri Oct 11 05:49:16 EDT 2002 | jason
Hi, Recently I am given a task to perform a drop test on a cardboard tote box. Inside is 180 pcs of assembled PCBA with cardboard dividers. But it was unable to withstand the drop test and thus the some of the boards are damaged. Does anyone ha
Electronics Forum | Wed May 19 17:54:41 EDT 2010 | gregcr
I have had problems corrected by swapping or replacing the power supplies in the box. Do you have a second GSM that runs the AIS3500 box? If so swap the power supply and see if the problem follows the swap. I have replaced the supplies inside the
Electronics Forum | Tue Jul 07 12:33:39 EDT 1998 | smd
I am about to place a huge PO for ESD boxes. Our assemblies need to be placed horizontally in the stainless racks until wavesoldered, but after the wash they will be placed in the boxes. The boxes have a conductive film but they are still cardboard
Electronics Forum | Mon Mar 03 16:36:51 EST 2003 | gregcr
I have a GSM that has a problem with the 3500EX vision box. The box has a AISI part number #700-3571-1 on it. Does anyone know who makes this? or if it is possible to service this item? I have replaced all the batteries already but there is a comm
Electronics Forum | Fri Nov 10 09:09:48 EST 2006 | russ
That is great point John, it definitely gets you closer to apples vs apples. Remeber one time when we were compared to a another Mfgr that made a square box of plastic for one of our customers we made the PCB the fit into that box, we had wires, fi
