Electronics Forum: broken (Page 2 of 39)

broken boards

Electronics Forum | Wed Jul 24 11:46:58 EDT 2002 | johnw

Claude, your not a manager by any chance are you?... you can't charge them for breaking them. Ok so yes there will be poor handling but if your going to fix the problem you have to look at teh route cause of it and fix that. You should be settign up

broken components

Electronics Forum | Tue May 26 11:13:49 EDT 2009 | xinxi

Is the components on the top or on the bottom of the pcb? Have you checked whether the temperature on pcb are too high when it pass through SW that it exceeds the limit that the components can take? Do check with the component manufacture for the te

BAS32 diode broken

Electronics Forum | Wed Jan 26 07:37:08 EST 2000 | Mikel Rodriguez

Has anybody experience (bad) with BAS32 diodes (glass) broken?

capacitor broken SMD

Electronics Forum | Mon Sep 07 02:56:27 EDT 2015 | dadiru

Hi all I have a 0402 broken capacitor in several boards . I'm in the correct place to ask about the root /cause of this failure ?

capacitor broken SMD

Electronics Forum | Tue Sep 08 20:07:55 EDT 2015 | davef

Please describe the section of the break or post a picture

Smd broken d9ca

Electronics Forum | Thu Sep 10 13:44:23 EDT 2015 | davef

SGS-Thompson makes a something or other labeled "D9CA" Best ... davef

Re: BAS32 diode broken

Electronics Forum | Wed Jan 26 12:22:52 EST 2000 | Mikel Rodriguez

The diode doesn�t appear completely broken. It takes a bit white color (cristal break, I think), instead of the normal red/orange. It works like a 20K-200K ohm resistor. !The diode can be working properly and sometimes change to bad! I think it may

Re: BAS32 diode broken

Electronics Forum | Wed Jan 26 07:55:17 EST 2000 | Dave F

Mikel: There's a lot of ways to break a glass diode. Poor material handling High placement force Thermal stress Board flex So, where is this damage occuring? Dave F

Re: BAS32 diode broken

Electronics Forum | Wed Jan 26 09:01:31 EST 2000 | Roni H.

I recommend you to test at least 2 other vendors for the diode; you can find that the problem is diode manufacturing, or else, you will find out that you have a proccess problem for sure. There is no use to start investigating your proccess before y

Smd broken d9ca

Electronics Forum | Thu Sep 10 13:57:02 EDT 2015 | frankxx

Hi danke . If there a link . Can you tell me what a ic this is . Sorry my english are very bad Thanks frankxx


broken searches for Companies, Equipment, Machines, Suppliers & Information