Electronics Forum | Fri Mar 18 10:18:35 EST 2005 | That's Mr. SMT-Tech to you!!
Here's a good one!!! I've got a customer who is designing a small circuit board, and they want to reflow BGA solder balls directly to the bottomside of the PCB to effectively create a BGA style interface between his PCB and another PCB. Anybody ever
Electronics Forum | Fri Apr 29 14:00:40 EDT 2011 | ppcbs
Our company is finishing up a design prototype for an easy to use re-balling fixture. 100% ball attach, and you can re-ball more than one BGA at a time. Initial investment will be in fixture cost, but you will be able to re-ball several chips in ar
Electronics Forum | Thu Feb 24 23:11:51 EST 2011 | kemasta
HI I have this BGA short issue, I took x-ray image, the solder ball having big void. We suspect the pad on BGA was oxidie. Reject percentage quite low, only 5 out of 6000. But after the BGA re-ball, is work fine. Anyone have any idea to trobleshoot
Electronics Forum | Tue Nov 11 09:19:17 EST 2008 | davef
By the way you asked the question, we assume that by "reballing" you mean bumping, we should be able to figure that out: * Volume of the ball = ( pi*d^�)/6 = [355/113] *0.6*0.6*0.6]/6 = 0.11mm^3 * Volume of solder required = 2*volume of ball = 2*0.11
Electronics Forum | Thu Jul 15 15:55:41 EDT 1999 | nards penalosa
| | We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec d
Electronics Forum | Thu Jul 15 12:26:56 EDT 1999 | Earl Moon
| We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec dwe
Electronics Forum | Thu Jul 15 11:57:15 EDT 1999 | nards penalosa
We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec dwell
Electronics Forum | Wed Oct 09 16:43:50 EDT 2002 | mjz289
Kester 256 has also worked tremendously well for us. We have soldered thousands of BGAs from 156 balls to 780 balls .8mm pitch with no solder problems (shorts,opens or voids) and no residue problems. Give it a try.
Electronics Forum | Thu Jul 15 19:05:58 EDT 1999 | Earl Moon
| | | We have been encountering diminishing ball shear readings these past few weeks, despite the fact that we did not change any ball shear tester parameter. Our reflow parameters are also within spec limits. ( 210-220 deg C max temp. and 40-60 sec
Electronics Forum | Fri Nov 07 01:01:55 EST 2008 | mskler
What should be stencil size to reball the BGA of 0.6MM ball dia.