Electronics Forum | Tue Sep 03 18:14:35 EDT 2002 | fmonette
I have never heard about a requirement for temperature ramp-up for baking components at 125C. In general the concern for delamination with moisture sensitive components starts above 200C (peak body temp). Most important is you should bake your com
Electronics Forum | Thu Sep 12 12:31:22 EDT 2002 | slthomas
"In theory there is no difference between theory and practice, in practice there is." That's beautiful...is it yours?
Electronics Forum | Fri Apr 25 06:13:47 EDT 2014 | preeticeda
how to mark a photo with red rectangle or so, how to add text in the photo
Electronics Forum | Fri Apr 25 06:39:37 EDT 2014 | alexeis
Hi, Please tell us why you need to do so. Best Regards, Alexei
Electronics Forum | Fri Apr 25 07:53:23 EDT 2014 | preeticeda
we need this for some documentation purpose.
Electronics Forum | Tue Feb 06 10:55:58 EST 2001 | pjc
Larry, Our specification is 0.075% for our Fuji CP3 and IP2 machines. At or above that figure the Maintenance Dept. has to get to work. We typically see 0.03% to 0.05% on average. The Fuji machines are all vision centering. We have found feeders are
Electronics Forum | Thu Oct 16 07:38:35 EDT 2008 | rway
There are seconds when it comes to components. Find out what her sources are and if she is purchasing from a reputable vendor. She may be doing what all purchasing agents do, and that is finding the best deal out there. Especially if her review de
Electronics Forum | Wed Aug 21 07:24:12 EDT 2002 | bayanbaru
What is the correct method to bake or cure the component?Standard baking practise by us is to place the units into oven at 125 �C for 8 hrs directly. But I was told that the correct baking practise is to cool down the Baking Oven to Room temp and onl
Electronics Forum | Thu Sep 12 14:48:15 EDT 2002 | stepheno
I found the article online that I was talking about. It was in Cirucuits Assembly. http://www.circuitsassembly.com/mag/0205/0205cmac.html I found the artcile quite interesting
Electronics Forum | Tue Oct 14 13:17:42 EDT 2008 | stepheniii
What kind of AOI machine are you using? Some OEMs seem to not understand that we want to also check for correct parts with AOI not just absence/presence and solder joints. But markings are an issue. I remember when 0805 caps had markings.
