Electronics Forum | Thu May 28 16:18:01 EDT 2020 | SMTA-Brandon
The reason for recommendations about refrigerated vs. desiccant dryers commonly comes down to the ISO class of compressed air they deliver. Refrigerated dryers are most commonly used in ISO Class 4 compressed air, and can't dry the air enough to reac
Electronics Forum | Thu May 21 12:53:38 EDT 2020 | spoiltforchoice
A cheap piston compressor (like you might use in a garage) should be rated such that it has ~50% duty cycle, you don't want it running continuously. They are very affordable but do switch on and off between two essentially hardwired setpoints. The b
Electronics Forum | Mon May 25 20:51:13 EDT 2020 | kylehunter
> A cheap piston compressor (like you might use in > a garage) should be rated such that it has ~50% > duty cycle, you don't want it running > continuously. They are very affordable but do > switch on and off between two essentiall
Electronics Forum | Wed May 20 16:07:22 EDT 2020 | stephendo
You want a big enough storage tank to smooth pressure. Figure out what size pipes you need and go a size bigger. Make a loop of the pipes with shut offs. That way you can shut down any section and still have air to the rest of the air line. Run the p
Electronics Forum | Sun May 22 23:31:51 EDT 2005 | thaqalain
If 1 & 2 are low, then 3 will be low: *Always *Sometime *Never
Electronics Forum | Mon May 23 08:34:20 EDT 2005 | davef
http://www.semiconfareast.com/logicgates.htm
Electronics Forum | Mon May 23 09:15:09 EDT 2005 | dougt
And Gate If one/both inputs are low, output will be low If both inputs are high, output will be high
Electronics Forum | Thu Sep 11 10:01:30 EDT 2014 | spoiltforchoice
1 - Too messy, parts already come in nice easy to use machine compatible packaging, tapes, reels, tubes and trays. All you are doing is adding an extra step and complication. A key production aim is to reduce the number of steps. 2 - BGA - a chip wi
Electronics Forum | Tue Oct 04 23:36:47 EDT 2016 | mrpackethead
How big an air compressor is needed to run Some Yamaha YS100 machines? What kind of air quality is required.
Electronics Forum | Tue Aug 11 12:28:51 EDT 2009 | JWPlainview
What are some overlapping characteristics between ITAR and AS9100 for PCB fabrication?